---
product_id: 142717896
title: "Factory Rotary Table 3\" -75mm Precision for Milling Machine Horizontal & vertical"
brand: "factory"
price: "₨2861"
currency: SCR
in_stock: true
reviews_count: 4
url: https://www.desertcart.sc/products/142717896-factory-rotary-table-3-75mm-precision-for-milling-machine-horizontal
store_origin: SC
region: Seychelles
---

# Factory Rotary Table 3" -75mm Precision for Milling Machine Horizontal & vertical

**Brand:** factory
**Price:** ₨2861
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** Factory Rotary Table 3" -75mm Precision for Milling Machine Horizontal & vertical by factory
- **How much does it cost?** ₨2861 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.sc](https://www.desertcart.sc/products/142717896-factory-rotary-table-3-75mm-precision-for-milling-machine-horizontal)

## Best For

- factory enthusiasts

## Why This Product

- Trusted factory brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.

## Features

- High Precision Quality Made Low Profile Rotary Table     Base Dimensions: 4. 1/8" x 3. 1/4" 4 T-Slots: 5/16" - Vertical Height - 1-5/8 Inch     Table Scale is Calibrated in 5 degree increment. Can be used both in horizontal & vertical position     Worm Gear has 36:1 ratio     The hand wheel is in 10 min division and can be set at 0.    ›See more product details

## Images

![Factory Rotary Table 3" -75mm Precision for Milling Machine Horizontal & vertical - Image 1](https://m.media-amazon.com/images/I/41Fq1054gjL.jpg)

## Customer Reviews

### ⭐⭐⭐⭐ 







  
  
    Nice product, good value
  

*by S***G on Reviewed in the United States on May 22, 2020*

For the price, I am very pleased.  Only a hobby machinist, but this is very smooth in operation, next to zero backlash.  I cut a backplate and mounted a 4" 3-Jaw chuck.  Works great so far, no complaints.  Finish could use a little work, but nothing that couldn't be honed out on the face of the table (a few sharp edges on the T-Slots).

### ⭐ 







  
  
    Worm Gear out of round from lock pin being too large..
  

*by A***R on Reviewed in the United States on December 24, 2021*

I hoped this item would work better then it does, I expected to have to disassemble and thoroughly clean the unit as its not the first purchase of budget machine tooling i have purchased.  but typically after a good cleaning and removing the casting sand missed by the factory and greasing with quality grease and tuning/adjusting these type f tools can be made fairly serviceable.  unfortunately when the worm gear was pinned to lock it to the faceplate, the pin used was so oversized that it egg shaped the worm gear.  this results in the worm to gear adjustment being too tight to move when it comes around to that side of the gear, and sloppy loose everywhere else.  this should have never made it out of the factory.  If the seller reads this, I am open to repairing myself if you would send a replacement gear set.  I do not trust that another one would come assembled any better so I will either return or replace with seller supplied parts.  Here is to hoping they will make this right!

### ⭐⭐ 







  
  
    Rough Project but Workable
  

*by C***E on Reviewed in the United States on November 2, 2020*

This is a project in and of itself. You will need to invest time in cleaning it, polishing and de-burring it. It is rough out of the box, but can be made to operate smoother and more accurately. It has backlash of from 5-9 degrees but you can work around this once you know of it. It it useful for a hobbyist, using a small mill. I have it set up on my Proxxon FM 70 and for me, it works well and is usable. Two stars is the best I can give it as it can be made workable, but shouldn’t have to be.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.sc/products/142717896-factory-rotary-table-3-75mm-precision-for-milling-machine-horizontal](https://www.desertcart.sc/products/142717896-factory-rotary-table-3-75mm-precision-for-milling-machine-horizontal)

---

*Product available on Desertcart Seychelles*
*Store origin: SC*
*Last updated: 2026-02-07*