Supco DE702T Dryer Drum Roller Set For GE WE3X89, WE3X82 Whirlpool 349241T, AP3098345, 337089, 3389901, 3397588

I have a Whirlpool Ultimate Care Dryer and after doing some research on my very noisy dryer, I realized, I needed to replace the Drum Roller's. I found this on a bunch of other sites for $30 bucks, and saw it on Amazon here for much cheaper, and pulled the trigger.The installation was easy (do a search for a video on how to if you need). One important thing to remember is to WD40 it a bit after you install it, or it will squeak a little bit.Noise is gone and my dryer is back to normal.

My rollers were just like these looking at them, but were differant. I am a skilled tradesman and was able to shave off the 1 side of the axle bearing to fit so the snap ring could hole the entire roller to the axle. It worked great, so I am happy but it was my fault for not double checking. I could only see one side of the picture and it looks the same but roller bearing is longer. (same dimensions on both sides. OEM has alike only on one side and shallower on opposite which faces out on axle with snap ring installed to hold roller assmble to axle! Works OK for now, we will see. For the price and quick shipment I can order a differant set and change later if needed?

While it wasn't an exact match for the rollers I removed, I can see these are good quality replacements and their fit was very tight. The triangles were a little light, but I think that is a good thing.

I replaced a bad roller with one of these and it was fine for the first 2 loads. During the 3rd load of laundry the rubber shredded off of the roller. I thought it may have just been a bad roller so I replaced it with the second roller from the set. This roller also shredded after 3 loads and could have burned down my house when the rubber fell off the roller onto the burner and caught fire. Luckily I was home and smelled the smoke before anything was damaged.The rubber on these rollers is very soft and flexible. I would not recommend this product.

Dryer was making a thumping noise which from past experience I suspected the Idler wheels. I Dismantled the dryer and the Idler wheel was chewed up and sleeve was out of round but the tension idler was ok but ordered this kit and replaced both. They were an exact replacement. Caution: Save and do not damage the little plastic triangle clips that hold the wheels on the shaft as the ones that came with these wheels(2 for each wheel) were hardened and cracked when I tried to put them on the shaft. I had to use the old ones as they were still pliable. Price was the best I could find and the delivery was fast.

This product was delivered in a timely manner which I was happy with. The problem is that I recieved these parts on January 16th and installed it that afternoon, the dryer started making all kinds of noise again on February 19th. I disassembled the dryer once again only to find all the rubber from one of the rollers had completely came off the plastic wheel, only lasted 1 month. I would highly suggest that you look elsewhere for these parts.

this item replace my original roller... its ok... it still make noise when it start up , but after about 2 minutes it runs ok... not what i wanted.. still a little noisy.....

Perfect fit and an easy do-it-yourself project with a little help from a video I searched for online! It saved me tons of money and they were the exact fit for my dryer.