Dometic Toilet Floor Flange Seal Kit

This worked just right on my Dometic 510 toilet. The improved brass shaft should hold up quite well. I lubricated the o-rings on the shaft with silicon grease so they would slide in without getting nicked and to help them seal better. After I installed the ball I sprayed it and the entire waste tube down with silicon spray. I also applied the silicon spray to the ball seals on all sides to keep everything lubed well. She now holds water like a champ and doesn't leak. This was part of a complete rebuild where I replaced the vacuum breaker, the water valve assy and upgraded the sprayer with a much improved hose. I also had to repair a water damaged floor which I built up under the toilet to elevate it 16 1/2" high, a big improvement.Parts used:- Dometic 385230335 Vacuum Breaker Hand Spray Kit - this was the wrong one for the 510, the pipe going into the back of the toilet was too short. I used about 1.5" 5/8 inside diameter clear nylon tubing to slip over the plastic pipe and added about 2" of 1/2" CPVC and a couple of hose clamps to secure it all together and now it works like it was meant to. By the way the plastic pipe going to the toilet is not a standard size of CPVC, PEX, or PVC so none of those couplings would have worked. Item that I should have used is the Dometic 385230325 Vacuum Breaker Hand Spray Kit with Extension, but my extension works so I'm leaving it at that for now.- Dometic SE341549 385310063 Floor Flange Seal which I lubricated all over with dish soap like the instructions advised.- Dometic 385316140 Rubber Seal Kit for Toilet - Black/Gray- SmarterFresh Rounded Bidet Sprayer Head Only, Stainless Steel Brushed Nickel Diaper Sprayer Bidet Head with a length of Stainless Steel Handheld Shower Hose that I had left over from other projects This spray head doesn't leak and looks a lot better, it will not fit in the spray head retainer from Dometic- Sanilo Elongated Toilet Seat, Wide Choice of Slow Close Toilet Seats, Molded Wood, Strong Hinges (Sea Breeze)- Luxe Bidet Neo 320 - Self Cleaning Dual Nozzle - Hot and Cold Water Non-Electric Mechanical Bidet Toilet Attachment (blue and white). I added a hot water line into my water closet for the bidet. While not expensive this bidet is great and saves putting a lot of toilet paper into the tank.So now my 22 year old toilet works like new again, the toilet is elevated, which makes it more comfortable for me, I now have a bidet, and it all looks great.

Worked perfect for my sealand toilet. No more odor or water leaking at the base. Thought it was rubber gasket at first but this was the culprit.

The product fit perfectly and the leak was sealed.What more do you need?

Good product, worked on my toilet

Never a lightly undertaken task.This is a GREAT time to thoroughly clean and sanitize your head. Dump your black tanks if you can beforehand. Shut the water off and catch the extra drips. 4 bolts hold the base to the floor. Once removed, stuff a rag into the tank hole to keep fumes contained then take the unit outside and hose and scrub the head off. Easy to disassemble and replace parts. Reverse order to reinstall. Works good as new

Exactly as described for my model 510 toilet. I replaced my bathroom floor and needed to change the old seal with this new one. No issues.

Easy to replace and seals well.

Worked well