Care TouchCPAP Tube Cleaning Brush - Flexible Stainless (7 Feet) Plus Handy Brush (7 Inches) fits 16mm Diameter Tubing

To be honest I don't enjoy my weekly task of cleaning my BIPAP equipment. Cleaning the tubing was especially difficult and I always felt that the inside of the tubing (the most important part to clean) never was cleaned well. I looked at a few of the Ozone cleaners but didn't like the price and some of the drawbacks of the method. I found this product and decided to give it a try.This brush works well in helping clean my tubing, I finely feel that I've done a good job. The most important thing to remember is to use the hint many previous reviewers have mentioned which is to insert the non-brush end through the tubing first. This allows you to pull the brush end through the tubing instead of trying to push the brush through. This makes all the difference and makes the whole process easier.

Just got it. Works great! had to maneuver the brush through the hose, but once you get the technique it works. insert the loop ring side into the hose, then pull on the loop ring to pull the brush through the hose. note: the hose needs to be in a fairly straight position (not looped or kinked) in order to be able to pull the brush through without damaging/kinking the hose. After brush, just rinse with hot water and hang to drain. I like it!

Made adequately for its purpose. Not sure it has to be as long as it is because you can insert it half way from one end of the hose and then the other, rather than all the way through from one side (which can be difficult) A good thing to have if you really are concerned that something might get in the interior of your CPAP hose. Having used one for months now, I'm not sure it's necessary to scrub the inside of the hose on a regular basis however. Nothing gets into it except filtered air from the CPAP unit, and exhaled air never enters it.Smaller brush is handy for cleaning small tubes and difficult to reach areas on humidification tank.

I bought this so that the tubing could be cleaned more than just soaking in soapy water. It has soft edges on the brush and will not puncture the tubing, which has an electrical element inside. The entire brush is perfectly made to clean tubing without damaging it. It's long enough to go from end to end. It does require two people to hold the tubing to take out the brush, but other than that, this is the perfect tool to clean c-pap tubes. I highly recommend this brush.

This was a bit difficult to slide through the long CPAO hose, took a bit to get from one end to the other and equally hard to remove. Good fit and cleans well, just not easy to use.

Just the product that I was looking for to maintain my CPAP's tubing. Easy to use and it stores perfectly in my CPAP case so I can travel with it. I don't understand how people are puncturing their tubing. The section of tubing that the brush passes through must be straight. This is clearly stated in the instructions. It helps to push the brush all the way through before reversing direction. Make sure that you order the appropriate diameter brush for your tubing.

This works as advertised. The brush fits snuggly into the cpap tube. With a little bit of effort you can move the brush back and forth to scrub the tube. After you get some soapy water in the tube, you have to push it in a bit, move it back forth to scrub that area. Then push it in further and then move it back and forth to scrub that area. Do that a few times and you'll have a clean tube. It gets a little messy so the bigger the work area you have, the better. I wish I'd gotten something like this years ago.

Since im only 5' 1" tall it was a little difficult for me to clean the hose because the hose had to be straight in order to advance the brush. But with a little yankee stick-to-it-tive-ness, i was able to get the brush all the way to the end. And i was able to remove it brush first. Now, I've not cleaned it since i got it, years maybe. I feel I've been blessed not to get any resp issues. I will continue to clean it regularly.

Me ha parecido fenomenal localizar un limpiador del interior de mis mangueras la básica y la que tiene capacidad de temperatura de mi equipo ResMed Airsense 10 AutoSet.Es obvio que dentro se quedan bacterias y con este cepillo he podido limpiarlas bien, pero no puedes hacerlo diario, te lleva mucho tiempo, al menos para la limpieza semanal de las Mangueras.

tige beaucoup trop souple pour l'utilité que je voulais en faire

excelente cepillo de limpieza para las mangueras de aire de los CPAP

Cumple muy bien su función.Funciona mejor si metes primero el cable y lo jalas por el otro extremo. (No intentes introducir primero el cepillo - No podrás).TIP. Usa sólo jabón neutro.. evita los jabones con aroma porque quedara impregnado el tubo por varios días.

Para limpiar esta perfecto. Entrega que coincide con la especificación enunciada.