Multitool Sheath Compatible with Leatherman EDC Belt Organizer Tool Holster Pouch, Black

This is a great sheath that holds a lot of multitools. The quality is great, and the magnetic closure seems like it will hold up for a long time. I cannot speak to the durability, but it looks like the company supports the product if there are any issues based on other customer's reviews.Here is some additional information that may be helpful to potential buyers:The belt loop will accommodate a 1.5" belt.Rechargeable LED lights that have been confirmed to fit:*Streamlight 66601 MicroStream*ThruNite Archer MiniOther multitools that have been confirmed to fit:Flissa 16-in-1 Multitool*Leatherman SUPER TOOL 300 (tight fit, but can be easily removed)*ROCKTOL 19-in-1 Multitool*ROCKTOL 29-in-1 Multitool*SOG PowerAccess*SOG PowerAccess Deluxe without included bits (The PowerAccess Assist and PowerLock will NOT fit)The sheath is very low profile while wearing on a belt. Some sheaths with belt clips sit too far off of the belt and tend to get caught on things constantly.The internal pocket is suitable for carrying one of the two Leatherman bit set holders. You can get both of the bit holders in the pocket, but the tool becomes hard to remove. Larger tools like the Leatherman SUPER TOOL 300 and the PowerAccess Deluxe will not fit with the bit set. I don't see this as an issue since you probably won't be carrying the bit set with the SUPER TOOL 300. The Leatherman case will hold both bit set cards plus the tool, but the tradeoff is that the sheath sits off of the belt pretty far. For carrying Leatherman tools with changeable bits like the WAVE+, CURL, or ARC, I recommend consolidating your most used bits into one card. For smaller tools like the SKELETOOL, both bit sets could be carried in the ACCKUO Multitool Sheath with no issues.The external elastic holders are great for carrying a flashlight on the open side. The closed side is great for holding a mini Sharpie, a bit driver extender, or a small pen like the NarwahlCo NWP1001 3.35" pen without fear of the item falling out of the bottom and getting lost.I am very happy with the ACCKUO Multitool Sheath and I hope that it provides years of service. I recommend this case over the official Leatherman nylon sheath with pockets.

Works well still have it still looks new after a long time of usage

I bought this to replace the worn out Leatherman pouch I had it’s a nice pouch, but The magnetic catch is pretty weak. I would’ve preferred to snap I think.

Good product. Professional mechanic and I take my multi tool out 20 times a day. The holster is reasonably worn for the amount of use it gets. The double belt loop confused me at first (I didn't see the inner loop) but it is actually a very thoughtful feature. I only carry my multitool inside so the inner elastic bands are a little annoying as they catch my tool. I'm just going to cut those out. For others that also carry additional items, they might be useful.I have seen others complain about the magnet, my magnet works fine but the button is a little hard to find the right spot for when wearing it on my belt. I normally don't even care because it won't go anywhere latched or unlatched so it is not a big deal.This is a $10 product and for what you pay, what you get has more than enough value.

For starters, I can easily fit 11 single / double sided bits and a magnetic extender plus my Wave+ clone with room on both sides for a flashlight and whatever else I can think of. This is my mini EDC toolkit I go to most often for repairs around the house when I don't need to break out any power tools.The magnetic snap is ok, not sure why there is so much play in it. A decent snap would only cost a few cents more. M.T. is snug enough that I'm not too worried. I tried shaking it a few times upside and it didn't budge. I think I'm safe :-)Forgot to mention there is no bulky plastic belt attachment on the back. Not a fan of those at all. I can fit my belt through the sewn in opening on the back or just throw it in my coat pocket.Materials and stitching seem adequate for the intended purpose. I think it will last a while.Update: I found a small ratchet I can slide into one of the side pockets and a 3" bit holder in the other. Magnet closure is absolutely fine. I would recommend this as it's held up just fine to occassional use.

I brought two of those but I just receive one piece.

**UPDATE**ACCKUO Contacted me immediatelythey offered to send me a BRAND new Multitool Sheath free of chargeI was really happy with the communication with ACCKUO and the attention tothe customer service, They went above and beyond to make sure i was happyi will definitely purchase from ACCKUO again5 stars for customer service, Communication and productPurchased in late January for my Gerber Leathermanwasn't a snug fit it was a little loose but did what i needed it to do. as for the Belt loops the straps are nice and strong. seams held up.The only thing that didn't hold up was the magnetic snap ring that keeps the flap closed it gave up after a few months and use The OUTTER Ring came loose and ended up falling down a sewer grate, i was able to save my leather men from the same fate2 stars for the durabilityPrice was goodBelt Loops Held upIn the process of trying to find a way to contact the seller NO LUCKWill update if anything**UPDATE**ACCKUO Contacted me immediatelythey offered to send me a BRAND new Multitool Sheath free of chargeI was really happy with the communication with ACCKUO and the attention tothe customer servicei will definitely purchase from again

I like the size of the case and how it fits my Leatherman Super Tool 300 snugly. The elastic strap on the side is perfect for an old Minipalm flashlight I had around. The Velcro belt keeper seems to work well. The belt loop is great when I need to carry this all day. Access to my tool is good and the magnetic button seems secure. Great value and pretty well made.