Starlink Pipe Adapter, Seamlessly Connect Your Starlink V2 Satellite Internet to Existing Infrastructure, Fits up to 1.38" Top Inner Diameter and 1.5" Bottom Inner Diameter

Yes. It worked well. Good quality. Thanks.

Solid well built product. Worked perfectly to get my starlink Dish mounted on a pole.

This wasn't what I needed. Sent it back

I got this in the hopes that I could attach it to a smaller satellite dish piping I had on the top of my house. It fit almost perfectly and I screwed it in tight, turns out screwing it in at all is a bad idea. The pressure from the screws and the specific spot that hit onto the shaft of your Starlink can easily be cracked by it because of how much pressure you have to put on one spot to hold it securely, It doesn't even have anywhere to properly click in it just kind of wobbles free until you secure the screw to it hard enough. If you're going to get something like this there's an alternative I found and I use now that's far better in terms of quality and fit. https://a.co/d/56wNakUI definitely would suggest this above the product here unfortunately due to how poor a design this one is, Luckily it didn't damage my starlink pole so horribly the other one couldn't click in and connect, although it left a good dent and scratched the plastic up quite harshly. the way these screws are set up to be used is not secure though ,let alone safe enough to warrant buying the product above almost any other, Even if you don't get the one I suggest. Find another one that has at least one screw for each cardinal direction at minimum.

These work well and fit 1 1/4" EMT perfectly. It tightens up just fine on the Dishy post, you're not gonna break it. Just don't tighten down on the latch or the groove. I have used several of these. I did have two that wouldn't fit on the 1 1/4" EMT, one was because of left over welding remnants and the other was too small of an inner diameter to fit. It worked fine on a smaller pole. Actually had another with welding debris but managed to chip it away and made work. Just wish they were $17.99 still.

Good value.

Had to use a shim for the satellite dish to be in line

It fits a 1 1/4" EMT pipe. all of the clamps do what they should - sorta. The side that mates with the EMT is as you would expect and you can tighten it up. But the side for the Dishy, you can't really tighten it up much or risk breaking the Dishy post. I used electrical tape to heavily wrap the two together to join them securely.

Ich habe diesen Adapter für unsere Starlink-Schüssel gekauft. Die angegebenen Innendurchmesser in der Beschreibung stimmen genau und auch sonst ist der Adapter von ordentlicher Qualität. Zwei Schrauben und der dazugehörige Inbusschlüssel werden mitgeliefert. Der Versand lief auch recht zügig, wenn man bedenkt, dass der Artikel aus USA verschickt wird.Ich bin sehr zufrieden mit dem Adapter und kann ihn bedenkenlos empfehlen.

Absolut unpassend für EU Standart Sat.-Rohre.Qualität furchtbar:Die Schweißnähte sind grauenhaft für das Geld!China Etikett wird vom Absender nichtmal entfernt. Billige Dropshipping Ware.