Term-LOK TLC310 3 Wire Compressor Terminal Repair Kit 10 Gauge

The terminals burned off of our Goodman air conditioning compressor. The AC repair person quoted us $400 to repair the terminals and couldn’t guarantee the compressor would still work. We purchased these on Amazon and the fastest we could receive them were overnight. They worked great and the unit is back up and running. My only concern is that the wires on the Goodman unit are copper and the wires on the repair kit are aluminum. We would have paid the extra money for copper wires. Also, since they have “Amazon Now” in our area I wish we could have these with a 2 hour delivery. (It gets hot here in August.) However, we are very happy as this kit saved us a lot of money.

Bought these on recommendation from a friend that is an Journeyman HVAC Service person. Connections on compressor kept burning off. Happened 4 times in a 8 day period. The last time, one of the posts was burned off to about half it's length. I replaced all connections with these and it's been running for nearly 6 weeks without issue. Inlcluding during a week of 95+ temps. Was an inexpensive and easy to install way of getting another Season our of my old AC Unit.Be sure to file/sand the posts on the compressor so they are clean

Worked great! If i couldnt get the connection to the compressor to hold, i would have had to buy a new out door unit. This set screw wire lead in saved me literally thousands! Thanks!

Excellent product enabling the compressor to live on - even if a terminal breaks off! While some compressors are easy to get to, keep in mind, if installing in a tight compartment you may want to find other options as you must use an allen wrench to tighten Term-LOK onto the compressor pins.

After continuously (like twice per month) replacing the connectors to my compressor, this finally ended that. Nice and heavy duty and I haven't had to touch it since. The spades on my compressor were getting bad and connectors were beginning to not fit good and therefore wear out quickly. Even if you only have stubs left on your compressor, this will attach tightly and prevent you from having to make a much costlier compressor replacement.

Packaging and contents clearly labeled TLC-3-12 except for barcode which showed TLC-3-10 which is heavier wire and also what I ordered. Hope this was a mistake. Will return/reorder. Unneeded pain....

The quality of the product is very good, however it is very difficult to tighten the contact points with the design of the screws.

The contacts on my compressor had corroded down to just nubs. I had tried soldering wires to them and every type of connector I could fine. Nothing worked. The entire unit is very old, but worked flawlessly, except for this. I hated to get a new unit simply because the contacts were corroded, but it was starting to look like that was going to happen.Then I found this product. It is designed especially for compressors with corroded contacts. Basically, you slip a metal barrel over what is left of the contact bar and use the Allen wrench to tighten a set screw onto the contact. Getting the allen wrench in there was tight for me, but after ten minutes, I was done. It has worked flawlessly ever since.