2-cb1106e2e21969f3.js","9888","static/chunks/9888-d48720c0d3cecfaf.js","1623","static/chunks/1623-8f9c42c74ef44b22.js","9678","static/chunks/9678-bc3175fdc66b489e.js","8275","static/chunks/8275-bc0cd43a5d16c2eb.js","8556","static/chunks/8556-0661fc57cf5e861e.js","1801","static/chunks/1801-ff2957ded3b42991.js","2177","static/chunks/2177-75a725a1c0a3636f.js","2450","static/chunks/2450-2af1615d1ec02554.js","3690","static/chunks/3690-d6ce99b634a3c6d6.js","6849","static/chunks/6849-a5aa65d17e203de5.js","298","static/chunks/298-222bf2d33590277a.js","7820","static/chunks/7820-25836c09109f5f87.js","686","static/chunks/686-da86c4d4102875ea.js","2755","static/chunks/app/%5Bdomain%5D/%5Blang%5D/(main)/products/%5BproductIdTitle%5D/page-314adcde2f47373d.js"],"default"] 35:T798,

INTRODUCTION
1. To get the best operation and life from your machine, please read and comply with these instructions.
2. Clean machine thoroughly before and after each use using cleaning instructions below.
3. Minimize the use of alkaline cleaners as they may cause pitting and dulling of the finish.
SAFETY INSTRUCTIONS
Remember that the blades are VERY SHARP! Be careful when handling and operating the machine to keep hands away from the blades.
PPREPARATION
1. The LEVER is locked in the down position (as it is shipped) for safety and convenience by inserting PIN through the HOLE in the LEVER.
2. The LEVER can be locked in the up position to safely and conveniently remove the BLADE AND HOLDER ASSEMBLY by raising the LEVER so HOLE aligns with the holes in LINK BARS and inserting the PIN through all three parts.
3. Place the unit on a good firm work surface.
4. If unit fails to work properly when first operated call NEMCO customer service at 1-800-782-6761
OPERATION
1. Insert PIN into HOLE in LEVER.
2. Hold LEVER in its UP position and place the product on the BLADES.
3. Remove hand/fingers from the cutting area and firmly bring LEVER down, to c