Arrow Shed MHD1015 Arrow Commander Steel, Eggshell, 10 x 15 ft. Storage Building, 10' x 15', White

This is a great she wed once you get it put together. The trusses make it very strong so it should carry the snow load where I am in S.W. Colorado. Here is some advise. It was said that you can put the shed together in 1 weekend with 2 people. It took me 2 weeks by myself ( I am pretty handy having owned a hardware store for 35 years) along with occasional help from my wife to set the trusses. Read the directions very carefully as the parts are directional (right,left,up,down,inside,outside). Make sure you have a level and especially square platform to build on Being plumb is also helpful. If you don't, when you get to the front of the shed, you will not be able to line up the roof and front panels. I laid out all the parts in my parking area and assembled the trusses, doors etc on 2 4x8 sheets of plywood. This helped assembly as you had a flat even surface to work on and you could pick up the screws you dropped. :-) My joke is that there are 300 pieces and 1,000 screws and bolts that needed to be put together. I made a couple of mistakes in assembling the frame which I found out in the end and had to correct with out too much trouble, so read the directions at least twice to make sure the parts are facing the right direction. The finished product is really nice, 8' doorway with 6' headroom for door and sides. 7' to the truss brace inside. I would give it five stars if there were a few less parts but I guess that is the nature of the beast.

I think this is a pretty good deal for the $ . I have been in construction all of my working life and didn't feel like building a stick built wood frame shed. This was much nicer to have all parts brought right to the back yard . I agree with other reviewers, there are a lot of parts and the screws and bolts are small & challenging for fat fingers . If its all square ,straight, and plumb it goes good One trick that might help is when I had to bolt 2 sheets together , wall or roof panels I taped the nut to the back of the inside sheet then you can screw the bolt carefully from the others side. The foil tape that they send worked great. Of course I didn't figure that out till half way through it all !

My husband is brilliant at reading schematics and figuring out the puzzle. We worked on this together and it took 3 days and a lot of hard work. The end result is very nice, exactly what we wanted. Some of the bolts are in awkward places that take 2 people to get in, one on the inside and one on the outside but with teamwork, it can be done. If puzzles, teamwork and some very sore muscles aren't your thing, recommend hiring someone to install for you.

lot's of parts, very time consuming putting this together! Haven't found any missing parts, but they weren't organized very well and some dents and damage do to shipping. Most parts had pre-drilled holes, but I have had to drill in may of the parts. Front and back walls are less sturdy the the center supports. When I saw what they sent me I said to my wife, "This was a mistake"! Most construction can be completed by one person, until you start hooking the frame together than you really need two. (make sure you wear gloves lots of sharp edges.)

There were a few problems trying to line up holes . They actually did not match up so they had to drill new ones. Aside the few minor things the shed is great.

A lot of work to put it together, but it went together very well. It took my son and I about 10 hours I would guess. Especcially considering all the parts, I was impressed at how well the holes lined up when we assembled it.

Nice strong building. Put it up myself in a weekend but would highly recommend getting a few friends to help.

Cheesiest POS building you ever encounter in your life