Formfutura 1.75mm EasyFil PLA - Light Grey - 3D Printer Filament

Description

EasyFil PLA is a high-end “easy to use” 3D printer filament, which is slightly modified with an impact modifier making the filament tougher, slightly softer, less rigid, much longer preservable and easy to print at relatively low temperatures. Another great advantage of EasyFil PLA – compared to regular PLA – is EasyFil’s low shrinkage factor, which makes EasyFil PLA nearly warp-free and therefore EasyFil PLA will not deform after cooling. Due to its low tendency to warp EasyFil PLA can be printed without a heated print bed. If your printer is however equipped with a heated print bed we recommend to set your heat bed temperature to ± 35° to 60°C. Next to its “easy to use” features, our Formfutura EasyFil filament range has an excellent roundness and very tight diameter and roundness tolerances, which makes this filament a perfect match with all common desktop 3D printers. Printing with EasyFil PLA 3D printer filament will go very smoothly with basically all FFF/FDM technology based desktop 3D printers. PLA (Poly-Lactic Acid in full) is a thermoplastic which is extruded from the starch of plants, such as corn, cassava, sugarcane, cereals, or sugar beet. By being derived from biological resources this type of thermoplastic can be biodegradable under the right conditions (such as an active compost heap, with enough presence of oxygen) and therefore has a much lesser environmental impact than thermoplastics derived from fossil fuels. EasyFil PLA does not contain any hazards, or chemical substances. In fact, all our EasyFil PLA filaments are RoHS certified and REACH compliant.