PL Premium Polyurethane Construction Adhesive, 10 fl oz Cartridge, 1 Pack - Versatile Construction Glue for Wood, Concrete, Stone, Metal & More

My application was to bond a plastic access panel to drywall and it worked perfectly - exactly as advertised. Pop the cartridge into a caulking gun and it's ready for use. One word of caution would be to apply first to the surface you are trying to bond (in my case the plastic access panel) and let it set up for about 20 min before applying to the surface as the directions indicate. This way it almost immediately bonds and holds in place as it will dry quickly enough so the item will not move around. It takes 24 hours to fully dry, but that time is necessary in case you are trying to do something that would disturb the item before set-up is complete. It's fairly easy to use but can be a bit messy if you're not careful and mostly because at least in my case the glue kept coming out of nozzle to quickly but that was probably more an issue with the caulking gun. Also wear gloves so you don't get it on your fingers, which I failed to do - it will clean off the hands, but not easily. The only other issue is it is pretty much a one-use product, since it will dry solidly in the nozzle blocking future use unless I figure a way to clear the blockage. If you're looking for a bonding glue that will work on virtually anything, that is easy to use and a good value, this may be what you've been looking for.

Worked great to mount a mantel on a granite fireplace. I didn't have a good surface to adhere the wood to, since previous crubling cement products were still covering most of the stone. I found a few small clean spots for the adhesive to stick to the stone bond to the wood mantel and it worked great. This product is amazing and had just the right amount of time to work with before curing to a very strong bond.

I bought this to re-glue two landscape block caps back in place. Note that the glue is a bit thinner and wants to come out of the tube, even after pressure is released. Hoping this fixes my issue!

I'm no expert on construction adhesives, but this seems to work great on pavers (paving stones). You do need a cartridge gun to use the cartridge type (duh), those (guns) are cheap and really, every homeowner should have one. This stuff appears to work well on pavers. It's reasonably priced. I can't speak to how well it lasts in terms of years or how it compares to others. The Loctite brand is a (at this time) a strong brand so I believe in the integrity of the product based on the company. If you live where it gets very cold/hot (e.g. midwest USA) you may want to just use a blob on a stone because of the thermal issues around water expanding when it freezes. Tips ---- -Be sure to cut a large enough amount off the tip, this stuff is pretty thick. You may need to experiment to see what you like, start small. -Don't assume that it will keep fresh in the tube. -Definitely use a cartridge gun with this, you can't get it out of a cartridge without that -I have not tried the smaller squeeze tube. It is available and may be more suitable for smaller DIY jobs. -Put a little light lubricant on your cartridge gun and it will be easier to use and give you more control over the adhesive. Just a follow up after using this for a while. So far it seems rather awesome. I'm doing many small DIY type yard projects with paving stones from my local big box store and this adhesive seems to work quite well. I make sure the stones are clean and dry, I apply liberally using a caulking gun and the stones seem to be quite strongly bonded. I was able to put the adhesive on 4 sides of the stones (bricks) and they stacked to make a very strong (albeit small) structure. I have also glued them end to end (essentially making a brick 2x4) and that worked well too.

good adhesive used for wood to metal, prep surfaces first

This is did really works wow, had some patio bricks and fire pit bricks that came lose.. this definitely did the trick. So easy and great bond. Highly recommend

Used it on my stair nose, held them down and was able to walk on my stairs immediately. Great, strong and durable.

Good

Good

Brilliant stuff

I put my rubber garage door floor seal over epoxy surface, work excellently

Very good adhesive. Was easy to dispense from caulking gun.

Awesome adhesive and works as advertised. However a little pricey.