RockTrix 2pcs 1.5 inch Hubcentric 5x4.5 Wheel Spacers (71.5mm bore, 1/2x20 Studs) Compatible with Jeep Cherokee XJ Grand Cherokee ZJ Wrangler YJ TJ Liberty KJ KK (38mm 5x114.3)

These fit my 2022 Kubota BX23X rear wheels perfectly. See photos. The axle on the BX23X does not have a raised outer flange that would fit into the tractor wheel ID. This means that only the studs and the taper on the wheel lugs align the wheels to the axle. The spacer does have an outer flange that needs to only fit inside the hole on the tractor rim, which it does easily as seen in the picture. Made a very positive noticeable difference in the stability of the tractor. Moving buckets full of dirt on a downward slope and needing to turn on the slope. While these were on order, 3 day delivery, someone ( not me FYI) didn’t keep the full bucket low, the backhoe rotated uphill or have a stabilizer on the downhill side just off the ground while turning to the left. Yup the tractor fell over on its side. No damage except a decal with a minor scratch. Had to take out the glow plugs to ensure cylinders were not full of oil before cranking. With the spacers you can easily feel the increased stability. The 4” would obviously be more stable but I like the narrow profile while moving around the multiple obstacles during a back yard remodel. Very very happy with the 2” spacers. Regular socket it needed to tighten the existing nuts in the deep holes. My impact sockets didn’t fit. Not a big deal at all.

I put these on my Kubota bx23s with a 60 inch mid mount mower and they work well. I can put chains on and off with the mower still mounted no problems.

I bought other spacers in the past that were supposed to be top quality. The holes for the lug nuts to tighten and torque them were so small, I couldn’t find a socket that I could tighten them correctly. I never felt safe with them and couldn’t wait to remove them. For this reason, I reluctantly bought these spacers some 4+ years later to try on a different Jeep. I have to say, I was completely impressed with how snug they fit and how torquing them was no issue at all. I feel completely confident riding with these spacers and would definitely recommend them to anyone needing some offset on their wheels.

Not all Jeepers are made of money. If you can not afford aftermarket rims, get Jeep Wrangler Canyon Rims. Then get the two inch spacers to augment the Canyon rims. It makes your vehicle not so topsy turvy and makes for a much better ride! Slap on 33x12.5 R15 BF Goodrich All Terrain K/M with your OEM Canyon Rims with the spacers and your Jeep is ready for hard adventure! I took them into abused logging trails the first day after installation. These spacers are hub-centric and wheel-centric for a very firm fit. They smooth out my 4.5 inch lifted wrangler. It had top heavy wobble and rocking when going over bumps a lot! Do not think about this. Just buy them if you can not afford properly offset rims. This is the best upgrade since my 4.5 inch suspension lift.

Very nicely machined product, but it does not fit John Deere 1025R despite the listed measurements indicating it would. Just thought others might find this useful in a search. Inner hub dimension is too small and the bolt pattern doesn't quite line up.

Used these on my 2001 Jeep Cherokee XJ and they work perfect. They are solid, nice looking and no issues with the product. I went with these based off of the price and they are hubcentric which I believe you should always run. Compared to others, which were drastically more $$, they appear to be a bargain. Also, most spacers out there for my Jeep are 1.5" and I wanted 1.25" as I didn't want my wheels to stick out too far.

Used on a Kubota BX23s with good results.

I placed these on a 1997 Jeep Wrangler that has a 2.5 inch suspension lift. I run 33x12.50 Mickey Thompson Baja Claw's on my Jeep and had issues with the tires rubbing when I make hard turns in either direction. So, I ordered the spacers to resolve the issue. The spacers were delivered 3 days before the estimated delivery date! They went on super easy and fit great. I don't drive my Jeep as an everyday vehicle so, it's mainly used for hunting and goofing off with the kids. I ended up taking the tires off and checking everything after about a month of trails and mud and everything was still tight. The Jeep also rides better on the road as well. This set is well worth the money. I looked at purchasing another set that only had 2 spacers in the set for almost the same price that I purchased these 4! I'm extremely happy with this purchase and glad I found them.

I never do review's. Perfect fit on my Kubota BX23. Also excellent quality.

Pour pouvoir installer mes roues don le coeur du rime est floche à la façade c'est vraiment cool

I bought these to widen the stance of a Kubota BX32S subcompact tractor. They bolted on perfectly. Unfortunately once installed the rear tires interfered with the 54" mowing deck, so I had to remove them. I can use them in the wintertime when the deck is off, otherwise they just take up space in my barn. I should have gone with fluid in the tires or wheel weights instead.