PC Products PC-Super Epoxy Adhesive Paste, Two-Part 32oz in Two Jars, Translucent, 32629

So, having used epoxy a lot over the years, I am familiar with using it from tubes, bottles and syringes. Most of the syringes just plain suck! They might work fine if you are squirting out a large amount, but they want to push out unevenly to start and you get more or less of each component when you are dispensing just a little. Plus, they do not seal well. This product surprised me: The product flows out perfectly evenly; the screw on syringe cap goes on effortlessly, and STAYS on!The adhesive is good. It is creamy rather than thin/liquidy, so that is either a pro or con, depending upon what you need. The workable time is accurate (15 mins) and you should note that the cure time is also accurate, meaning it is NOT a fast cure, but take several hours before it is fully cured...that can be an issue depending upon the task!

This is my new go to product for many repairs. The use of the syringes to dispense the material means I never have any product that is wasted by one of those old style tin tubes. I can easily measure out the exact proportions of hardner and resin so that the epoxy sets up perfectly every time. While it is a little more expensive, I have had zero waste, since I started using PC Super Epoxy. I recently used it on the wood floor 2x4 framing for a small shed. The outside of the 2x4 had become checked and cracked after 30 years exposed to the weather. I sanded down the 2x4 and cleaned up any loose pieces of wood fiber. I mixed up, in back to back applications, several syringes of PC Super Epoxy and coated the exposed surface of the 2x4. The PC Super Epoxy went on smoother and stayed where I put it far better than the other very popular name brand (JB Weld). I had already tried to do the same job in another section with JB Weld and it was hard to apply and get to stay in place and therefore it looked sloppy and did not have a good finish. The PC Super Epoxy works like no other epoxy I have ever used. It did not sag or run but instead clung to the wood and made a smooth seamless surface. After it hardened, I sanded it lightly and finished with primer and paint and it looked better then new. This product is amazing and i have used it several repairs and really love the results achieved.

Used this product to anchor metal stair balusters to my handrail and stair treads. Worked perfectly. Hardened quickly. Strong bond. And all of this without the mess of measuring and mixing normally associated with epoxy products.

I am a ceramic artist and needed some epoxy to fill in a split in the foot of a very large porcelain bowl. I bought PC Products PC-Super Epoxy Adhesive Paste, Two-Part 4oz in Two Jars, Translucent 46644. The split was not structural but aesthetically, it needed to be filled. It worked like a charm! The only negative is that it's white!! Not clear! I put it on several items, thinking it would dry to clear. When thick, it's white! I had to use a razor and a dremel to get it off some ceramics where I needed clear. The container looked just like the one on Amazon and says Waterproof Translucent Paste on it. The positive is that it works very well as a paste epoxy.

worked as it was advertised!

Excellent item, great delivery, economical packaging, etc. Absolutely wonderful.

I followed the YouTube video instructions for using this to repair swim fins using a fiberglass patch. The fiberglass patch failed miserably and honestly I was skeptical of the recommendation to use fiberglass near skin in the first place. I was able to easily peel off the fiberglass patches. Next I buffed the surface and reapplied the epoxy without the patch. Using it without the patch seems to have made a much stronger and better repair. Only time will tell as I have to wait another week for the pool to reopen and I can test the fin repair in the pool. I only gave 3 stars as I can’t test the repair just yet.Denatured alcohol was recommended in the video but I did not have that. I used isopropyl instead which may have weakened the bond of the first patch. I definitely suggest having isopropyl handy to get this off the skin or any other surface area before it dries.

Good product. Easy to dispense and mix. Sets up well. Looks like a solid bond.

Easy to use and store after. Used it to glue metal and plastic together. Worked well.

Reliable product

we do restauration furniture and this is the best glue ever for some can of antique furniture !!But too expansive !!

i've used quite a few different epoxy glues in my career. this one is one of the nicer ones. right away, impressed with the dispensing syringe. not cheap like most others and a great seal. The glue dries hard, but if left in water, will soften.

Good product but after several uses the nozzles became clogged and it was difficult to squeeze out equal amounts of the resin and hardener.