Tricia Wood Platform Bed Frame with Adjustable Headboard/Wood Slat Support with No Box Spring Needed/Easy Assembly, King

Putting this bad boy together was a dream. I have been assembling stuff like this for 20 years and have wanted to burn some pieces of furniture in the past rather than finish assembly. this thing was quite the opposite. it was wonderful. I can't recall all the little touches that made this so consumer friendly, but here are a few: - the Styrofoam packaging were in little bags so foam doesn't get everywhere during unpacking (granted a little more plastic used) - you will not need ANY of your own tools. seriously (see below) - on other projects, the bolts to connect the frame typically need to be held in one hand with a flat head screw driver and tightened with the other hand. these were designed to be held with your hand while tightened. - they give you a ratchet for tightening all the allen bolts. you will likely decide to keep it for other projects. it is a really nice little tool. - the predrilled holes for the frame line up perfectly and have perfect fitting grooves for the washers - the metal support arm is felted on the underside to prevent metal on metal noises from appearing over time - the wooden platform lays in with velcro. honestly, a brilliant idea. it will never move and it installs in 1/4 the time vs a drilling option. once you are done, you have a beautiful, sturdy bed frame. hats off to the manufacturer all the way around!

I'm honestly confused here! For the price of this bed (being fairly cheap), I was expecting the absolute worst. However, the build quality is AMAZING! Its obvious that a lot of thought and care was put in regarding assembly instructions. It was easy, clear and concise. They've even made it simple with a neat hardware package (the washers and bolts) separating and labeling each set. Tools were also provided! I couldn't be happier. The wood us REAL and very sturdy. I'm amazed that something with this much quality is at such a low price point.

We love this bed frame! It arrived while my husband was at work, so I decided to assemble it myself. Be advised! We ordered a queen size, and the box it arrived in was at least 6 feet long and weighed well over 150 lbs. I was able to drag it into our house, but there was no way I was getting it up stairs on my own. Thankfully, there weren’t a ton of pieces so unpacking the box on our ground level and carrying up the individual pieces worked just fine. As far as assembly goes, the instructions are very straight-forward and easy to understand. I had no issues and the frame itself turned out beautiful! It’s sturdy, made of great quality wood, and it doesn’t shake or squeak when we’re on it. The price is excellent compared to other similar bed frames we were looking at. Overall, it’s a great addition to our bedroom. And our dog seems to think so too.

My Wife and I bought this bed frame while waiting for a new King mattress to arrive. The frame looks great, really glad it matches our room so nicely. Building it was surprisingly simple using the tools it came with. The hardware/wood pieces feel very sturdy and not cheap at all, which is great. One exception is after attaching the headboard it still wobbles a little bit. This is the first bed frame and headboard we've had in a lot of years, so I don't have much to compare to in that regard. When our king mattress arrived we quickly set it up on top of the bed frame. A couple problems we found with a mattress on it were about sizing. The standard king sized mattress fits almost, but not quite perfect on the frame. Basically, our mattress hangs over both side edges and the bottom edge about 1/2 to 1 inch. The frame is just slightly too small for a standard king mattress (specifically we have a 9 inch tall standard king latex mattress). This means the edges of the bed kind of droop slightly since there's no frame to support it. It would be nice if the headboard was raised about 1 inch, which would allow our mattress to slide up the bed a little further. But for the sides, the frame is just simply too skinny for a standard king mattress. We are going to keep the frame, but that little bit is always going to annoy me, unfortunately. It just needs another inch or so of width to be the perfect frame for a king sized mattress.

Just received the bed today, a day earlier than expected! It's a pretty heavy box. We took the pieces out and carried separately upstairs to our bedroom. I love that they put the styrofoam in plastic that protects the pieces, no styrofoam breaking apart causing a mess! Mostly my husband put it together with very little assistance from me. It took 30 minutes. Instructions are pretty straight forward. Layout all the pieces where they will go and then start assembling. Our King mattress fits almost completely on the bed. We have a 9 inch memory foam mattress and a 2 inch memory foam topper. It only overhangs at the foot of the bed 1 1/2 inches. Not even noticable. Sides are perfect! My only future concern is the wood slats, if they will hold up over time? They are on the thinner side. I was a little worried the bed would be too low but it's not bad, unless you do want to store things, which we don't. Our last bed was from IKEA and the footboard was defective out of the box. We had another issue with footboard a month later. 3 months later the supports of the bed broke. We rigged it up but had to almost everyday fix the slats that would fall. So really hope this bed lasts longer. I have been researching beds for the last month on many different sites and at stores. After reading mostly good reviews on this bed, I decided to go with it. Plus we were tired of sleeping on our mattress on the floor! I give it 5 stars today for faster shipping, the look of the bed, ease of putting it together, and mattress fitting on it. Will update review if any issues come about.

Relatively easy to put together We just put our foam mattered on the frame with no box spring and it has worked out great.

Mattress goes over the bed frame at the end. Headboard is very flimsy with movement.