Hole Saw Kit, SUNGATOR 5-Piece Hole Saw Set with 4 Pcs Saw Blades in 1-1/4, 1-1/2, 2, 2-1/8 Inch, 1 Mandrel. Carbon Steel Circle Hole Saw Kit, Arbored Hole Cutter for Wood, Plastic, PVC Board, Drywall

Good product !. I’m happy for the result . I thought it won’t work because it was a thick wood. I would recommend this!

I love my whole saw. I made my own hydroponics growing system. They make perfect circles. I give this product to five star review. I’m going to get them in different sizes. I recommend this product.

Bought and opened to find the large bit adapter difficult to loosen the securing pins. Some WD40 and 15 minutes of elbow grease later got it unstuck. Defect in the thread had seized it. Cleaned it and now it works like a dream.

I bought two cabinets to use as the entertainment center under my tv, they didn’t have holes in the back for cord organization. I saw this set on Amazon and decided to give it a try….GLAD I DID! Took me about 5 minutes to drill a hole in the back of both cabinets. Perfectly round and smooth. Very happy

I have an old Ikea dining table that I was going to throw out, but I figured maybe using it on my backyard. As it gets really hot in the summer, I got a patio umbrella and wanted to cover the table. I need a 1.5" hole in the center of the wooden table, which is why I purchased this product!It's easy to use, attaches to my Ryobi drill, steady on the hand, and makes a perfect smooth hole in the wood. Needless to say, I. Very satisfied with the product. It comes in packet including 4 different diameter saw with a spare drill bit and an Allen key to change the bits. It came with a little bit of lubricant/grease on the saw so be wary of that. I recommend using gloves to protect your hand. Looks and feel durable. You can see the finished product on the pictures.

To use this on a 2x4 you drill one side, find the hole that pokes through on the other side, and drill through from there. It's a bit wobbly, but it cuts well enough (but be sure to get the drill VERY tight on the shaft- you really need a bench vise- and tighten between sides). HOWEVER- it ends up falling short by maybe1/8'', so you have to get a skinny screwdriver or small chisel and break the wood "donut" out. Not all that difficult to do, but it's hard to imagine why they didn't make the drills a wee bit deeper- then it would drill through neatly, no fooling around poking the wood out.

I bought this and two caps because I was running wires through walls for my TV, Apple TV, Bose home theater TV bar. My wife hates seeing wires go from the top of our fireplace to the TV. So I had to put the wires through the wall and I had to be careful with it to make sure it was clean and tight. Without these drills you wind up cutting weird looking holes and no cap will fit into the hole to cover it up. So these are required. You can also use these to cut holes in wood desks to accomplish the same task with plugs and cables.

I have used two bits several times on thick plastic and plywood. They cut holes, as clean as you let them. Start slow, apply steady pressure and I’m sure you will agree. There are absolutely better hole saws out there, but for the price I am well satisfied. These are clearly for home projects and crafts. I would not want to use these often. I seriously doubt these would go through a metal door for example.

I bought this item off amazon for its price. I wasn't expecting a quality product like Milwaukee. I don't use hole saws often but when I need 1, I would expect this product to get the job done. Fits my ⅜ dewalt cordless drill.