Pre Curved Shower Screen Door Bubble Seal | Fits 4, 5 or 6mm Glass | Seals Gaps of Up to 7mm | 850mm Long | SEAL027 (85cm Length)

Although it was correct size for curved glass shower door, it was hard to fit, had to place in hot water to make seal more maleable and use silicon and duck tape to hold in place until cured works OK but let's small amount of water out if shower head points at door, average product

Over time I have purchased a couple of different versions of these, the first was great & good value so when it was time for a replacement as they eventually look rather grubby & are notoriously hard to keep clean I went straight to the same supplier & bought an identical one. Big mistake, it was stiff, cheap looking & nigh on impossible to fit without kinks, looked awful, obviously changed to an inferior product so I chucked it. Fast forward to this one, more expensive, pre curved, looked great & the service was good. Not easy to fit, very stiff but looks decent & does the job but thinking paying more would give me more was incorrect. Hopefully over time it will be a little more flexible, will have to wait & see.

Provided a good replacement seal for the shower, and being pre formed made fitting easy

After sending back three dreadfully inferior (admittedly cheaper) screen seals in rage and sheer frustration, I found that it was well worth paying £1.50 for a sample of this fantastic product before purchasing the whole thing.I was also very impressed by the company's short film which explained the correct way to fit the seal.It might seem counter-intuitive, but you do NOT fit the seal from one end and slide it towards the hinge of your screen - if you do that - the seal will just get stuck less than half way and will not fit the entire screen.Instead, you click it on at the hinge end and firmly push it up onto the glass. You can be firm because you won't damage the high-quality seal.It was immediately clear that it would fit really well, so now I have a beautifully secure screen seal - and couldn't be happier.I was tempted to get a couple of spares because all the seals I have had in the past eventually got algae and black mould lodged in them.But ultimately I opted for just one spare, because I think that this 'bubble-style' seal might last a lot longer since it has no excessive crevices or indeed a long blade to split after a short period of use.Delivery of the initial sample - and then the full length items - was very fast. The seals arrived in very solid, protective cardboard tubes - which is yet another pointer to the premium nature of the product and its presentation.It is so refreshing to be really impressed by a company that delivers on everything that it promises.

For the last 15 years, when necessary, I have replaced the seal with an original from the manufacturer. The bubble seal becomes blackened inside and looks unsightly. As these originals are for some reason no longer available I decided to try these.They look good, they seem good quality and they fit the curve well. However, every time I wish to open and shut the door over the edge of the bath, friction causes the seal to pull off. I have cured this by rubbing a film of hand soap over the bottom of the seal every time I shower. This is a bit of a bind.It is the correct seal for 6mm glass and the gap at the bottom is 4mm. I think if the bottom gap was maybe 6 or 7 mm this would be a very good product.

After trying a few of these . Some not flexible enough , curve not sufficient or just not staying on the shower shield . This was put on In five minutes no wrestling . Excellent fit . Really pleased

I usually buy a £5-£10 shower seal but they always need replacing after a year or so as they either split or go mouldy. I invested a penny short of £20 on this strip. I had measured the glass screen and the gap it was to cover several times so I expected the strip to be perfect. I fitted it and trimmed it to size so we were able to use it, only to find that that when we took the screen over the bath edge (it was a very tight fit - which surprised me as the glass thickness and the gap measurement between the screen and the bath were in line with the suppliers measurements) the strip pulled off. We tried several times to rectify this but to no avail. To cut a long story short the strip was returned to the supplier as it wasn't fit for purpose but as it had been cut they would not issue a refund for the shower seal. They did however give me a 1p gesture of goodwill refund which I find to be totally insulting.

Arrived very quickly. Took a bit of manoeuvring to get it on but I think this is because the curve on my screen is not even and a little over 90mm. But now it’s on it seems to be perfect. Easy to trim them with sharp secateurs. Felt a little expensive for what it is though.