Active HDMI to VGA

I got this for my brother's Mister DE-10 Nano setup. It works great for the direct_video mode. (see attached video and pics) This allows you to output a pure signal from the HDMI port and this converter can handle it. You can plug your MiSTer into an old teevee or a VGA monitor (haven't tried that but i'm sure it works fine). And the output is native resolution/pixel clock. I used this VGA->component adapter (which also does SCART), and I highly recommend both of them. https://www.amazon.com/dp/B0DFLRZ5G1 VIDEO: This is the good stuff, it looks amazing on a CRT, and there is 0 latency! Gameboy advance on a CRT? Yes sir!!! AUDIO: The analog audio 3.5 mm output from the UGREEN converter sounds as good as the picture looks. The only slight limitation is that you must leave the output at 16-bit/48kHz. I tried 96kHz and i got crackles... but it's not a big issue for this setup. For me, the audio quality coming out of the UGREEN was MUCH better than the audio coming from my mom's cheap flat-screen (which is what i was using before).

Works great. 1080p TV died and needed hdmi output from my game consoles. Had a spare 1366x768p monitor lying around and this did the trick. Before buying, keep in mind: 1. If using this on a PS3 like myself, you will need an HDMI splitter. This does not support HDCP as far as I know. 2. This DOES allow for output of larger resolutions than the size of the monitor it will be used on. My PS3 outputs in 1080p on my 1366x768 screen which obviously is much smaller than 1080. 3. You will need an extra plug, as well as a USB power block in order to power this lil thing. I actually had to break out an extension cable just for this. 4. There is no input lag as far as I know and this is going through an HDMI splitter, then through a capture card, then through this thing. 5. It does not come with a 3.5mm audio cable so you will need that and some form of speakers if you want audio. Some monitors have 3.5mm input built-in. I can't really complain about anything. It does what it needs to and it's cheap. Go for it, don't go for anything cheaper.

I bought it as a backup for an alternative connection and I wasn't planning to use it but I ended up trying it with an old LCD screen by connecting it to a relatively new GPU (Rx 6700) and it worked great, previous adapters didn't work and I decided to buy this one because it had a connection for extra power and indeed that was the problem with the others. Now I have a very useful extra monitor. There is no distortion in the image, there is no type of interference in the signal, the image quality is what it should be.

I got two of these for clinic rooms at the 2015 NMRA National Convention because two of our projectors had only VGA inputs. They worked great with the HP stream book cloud computers we used for PowerPoint duty. They also worked well with the smattering of laptops that individual clinicians brought with them. However, a couple of months after that I tried using one to convert the output of a MacBook Pro (sorry don't know the model) belonging to a clinician at a mini-meet. The MacBook refused to recognize it! Luckily we tested this combination before the clinician was in front of an audience so were able to export the mac presentation file to .pdf on a thumb drive and used that with one of the HP stream books. The picture quality seemed decent, however I wasn't using them with top of the line projectors so I can't say they were "picture perfect"

The adapter works really well and it is easy to set up plug the VGA into whatever computer do you want to use the VGA for and then plug HDMI cable into it and then plug the HDMI cable into the TV plug 3.5 mm jack into the computer Stereo or front front headphone jack and the quality of the picture is great

I recently bought a Raspberry Pi 3 B+ kit for use as a small database server on my network. I had an old 7" vga capacitive touch-screen monitor that used to be in a flight sim setup. Now I didn't bother trying to setup the touch screen functionality (since it's a server that will always be sitting at the console.) Now I read that I needed to find an active hdmi to vga device in order to work with the Pi, so I chose this one because it could be powered externally. However, I'm very pleased to say that, at least with this old, low resolution monitor, I do NOT need to supply external power to the converter, and yet it works perfectly! I have not tested the audio jack on the adapter, as I don't have any need for speakers on a database server, but the main thing is that this adapter worked, and it worked great right out of the box. I didn't have to fiddle with any configuration settings on the Pi 3 B+, it was just plug and play.

It Works Real Good, It Doesn't Need The Power Even Or I Am Not Using The External Power With My Laptop And It Is Very Inexpensive, Highly Recommend

Compré este cable para aprovechar las múltiples entradas de las que disponen los monitores actuales, que suelen ser VGA y HDMI en su mayoría. Para probar su eficacia lo he probado en un monitor antiguo, un Acer AL1916W, que solo dispone de entrada VGA (también denominado D-SUB). Conectado a la salida HDMI de un portátil, y alimentado por sus USB, el monitor VGA enciende a la perfección, incluso sin conectar el USB (seguramente esto depende de la revisión HDMI del portátil, que es capaz de alimentar al adaptador sin necesidad del conector USB). Sin embargo, conectado a la salida HDMI de una Raspberry 2B, y alimentada por la propia conexión USB de la RPi2, el monitor no enciende. La solución a este problema con la Raspberry Pi, pasa por alimentar el adaptador con una fuente de alimentación externa como la que usa la RPi para funcionar o cargador de móvil, o bien alimentar el adaptador con otro dispositivo que tengamos. Este problema puede deberse a que los puertos USB de la Raspberry no suministran el Amperaje suficiente para hacer funcionar el adaptador. Después de haber probado con distintos dispositivos y pantallas, puedo decir que el dispositivo cumple con su función. Aunque para dispositivos o equipos cuyos puertos USB o salida HDMI no le suministre la energía necesaria se requerirá de un adaptador de corriente adicional o solución similar que otorgue ese amperaje para el correcto funcionamiento del adaptador. Es un adaptador recomendado para aprovechar esas conexiones VGA de algunos monitores y televisores, y también para poder conectar más de dos equipos a un monitor o televisor que tenga varias entradas de vídeo, en caso de que la entrada libre que no usemos sea la VGA, con este adaptador podremos tener un MiniPC, Raspberry, ... conectado para manejar su interfaz esporádicamente. Ugreen 40248 - Adaptador HDMI a VGA (1080p, Audio 3.5 mm, Micro USB para Alimentación), Color Negro

Shipment and delivery---top notch...that one for Amazon. Item itself solved the problem of having one HDMI port with two intermittent HDMI inputs from different sources. and Yes, it is functional and works fine so far. To be honest, perhaps a better option than utilising different ports behind a screen (say VGA and HDMI) and use different cables and converters. This one seems to be a clean solution.

Helle guys . I almost search every video on YouTube regarding How to connect ps4 to vga monitor. Nothing got . But after I saw this product on Amazon and purchased . This is excellent product to connect ps4 to vga monitor with out any other source like power . Because this product has in built micro usb port to provide power required to connect ps4 to monitor. So you don’t need to be get vga splitter to provide power . Its also has aur connection for audio. Its very small and works like two to three adapter in single adapter. Quality is Best . So If you want to connect PS4 to your VGA monitor then go for this .

Product works as intended. Fuss free.