4-Pack Tie Down Hooks Anchors Bracket Compatible for 2000-2017 Ford F150 Styleside 2004-2017 & Explorer Sport Trac 2001-2010 Bed Inner Hook Kits

Works fine. A very close match to Ford OEM.

Had to return them as the holes I was going to use for them weren’t threaded. But they seemed very sturdy and I’m sure would have performed well. Also great Price.

did exactly what they were designed to do, hold cargo in the bed of my truck, great buy

Mounted these on a track system, with some fender washers backing them up so they don't fall into the track. Much improved over my 5/16" eye bolts that wouldn't fit a double-J ratchet strap hook, because these will, yay!Docked 1 star because as others noted, they have a nice sharp barb left right where you'd run a rope if using it like a cleat. I'll never do that so I didn't bother fixing it yet... but it is pretty sharp, so maybe I will one day before I find a way to cut myself on one.Other than that, the quality & sturdiness are surprising for the price, at $2.50 per I can't really complain. Haven't actually tied anything to them, but I can't imagine I could hurt them with anything I have any business tying to the cargo track bolted to a composite bed. The holes are drilled just right for 5/16" bolts (good, cuz I wouldn't care to drill 8 of em bigger...beware if you're using 3/8" track nuts) and the ends are just the right size for flange-head bolts.

There are attachment ports in the truck bed, where you can attach these tiedowns. You must remove the plastic covers and then clean out the holes with an 8 mm tap because the bed spray liner needs to be cleaned out of the holes.These tie downs do not come with bolts, and those will have to be purchased separately. I purchased stainless steel bolts at my local hardware store 8M125 bolt sizeAbsolutely love these tiedowns!

Installed these in various locations around my truck where I need a place to attach tie down. They work really nice, self tapping screws make the job easy, just have to be aware that they have limited holding power as the are held by just two screws into sheet metal that is Aluminum.

Needed anchor points for tie downs and padlocks on a 2001 Ford Ranger Sportside bed. The bolt spacing aligned well, allowing these to mount flush with the existing anchors and install with OEM bolts. Anchor finish is acceptable, but seems thin, so I anticipate they’ll need re-coating after a while to mitigate rusting.

The anchors fit my 2014 Nissan frontier, also bought some M8-1.25 x 30mm bolts to secure to bed. You may need a pry tool to remove the caps and a tap to re-tap the threads, i had a harbor freight kit that worked great. used a drill with the taps as the top anchors location on my truck did not have room for the taping tool. one thing to note using a drill, start off right and go slow to not chew up the threads. Also may need to retighten after first use if you have thick bed-liner due to the soft material getting compressed.