sourcing map Forstner Drill Bits 19mm, Tungsten Carbide Wood Hole Saw Auger Opener Woodworking Hinge Hole Drilling Boring Bit Cutter Gray with Case

Surprisingly good for the price (£5.09), cuts well and looks to be good quality. Can cut up to 50mm deep, maybe a bit more if you really need it (the shank is 80mm) For the most part cuts were clean and easy to make as long as you start slowly and don't overload the bit you shouldn't have any problems. Would definitely buy again and will be buying more sourcing map drill bits in the future.

excellent quality , great price with a super service

Quality seems fine, but accuracy is not great if you are going to use it on hand drill. Tried it with my dewalt drill with free hands. Accuracy is good on 18mm OSB sheet. However, the accruracy was not very good on 2' x 4' treated timbers. The product page already mentioned it's not designed for hand drills, so keep that in mind if you still want to try.

Was slightly apprehensive about the quality of this drill bit, but after having cut a few holes, it seems to perform very well. Close inspection of the TCT cutting parts reveals it's less expensive origins, but it is constructed reasonably well. The side cutters are positioned slightly squint, but in the final grinding stage, this is compensated for. There is 20thou run-out on the shaft, however, only 5 thou run-out on the side cutters. It cuts quite clean, some slight cross grain tear out on pine, but cut very cleanly on oak. Sides of the holes and top edge are very clean. Hole size was quite accurate, within .2mm. This tool will not get heavy use, so should be fine for me. Hopefully it will continue to perform well. Overall, I am very happy with the performance of this bit, but I have only cut a few holes so far.

Yes it's a drill and it cuts nice accurate round flat bottomed holes in wood very nicely and very easily just like its desgned to do.

For the price ( I've only got a small workshop) this forstner bit is Very good. Just done 20 holes holes and no problems. Cheap and does the job. Will buy again. 9.5 out of 10👍

I bought this to drill holes for bench dogs in 50mm thick worktop. While it drills very cleanly it wanders off vertical on this depth making it unsuitable - I ended up using a more expensive Bosch brad-point drill. Beware of auger type bits which I also tried - they snatch and even stall my drill press. Excellent for the use intended.

First time I have used a forstner bit and only used this one a couple of times so no idea on the longevity. So far so good, make a nice clean hole or recess came oiled to prevent rust and with a small plastic case

Tal cual viene en el anuncio

Solide Qualität. Kann sich mit Bosch Forstnerbohrer vergleichen.

Alles super Danke

Lange Standzeit. Gute Qualität.

Ja, ich habe bei dem Preis nicht viel erwartet. Dass der Bohrer nach 20 Löchern in 20mm Buche so aussieht, hätte ich nicht gedacht. Gebohrt wurde mit ausreichenden Kühlpausen und passender Drehzahl mit einem BOSCH GSR 18v-55. Eigentlich hatte ich mir den Bohrer zum Verhunzen zugelegt, um die guten Forstnerbohrer zu schonen. Ich bleibe bei BOSCH. PS: In Kiefer hat er bei 2-3 Testbohrungen recht gute Ergebnisse geliefert.