Professional Master Airbrush Multi-Purpose Gravity Feed Airbrushing System Kit with a U.S. Art Supply 6 Primary Opaque Colors Acrylic Paint Artist Set - G22 Gravity Feed Airbrush and Air Compressor

I am new to body painting and purchased this system for that purpose. I haven't had a lot of experience with it yet (no one wants to volunteer to strip naked and be painted - go figure!) But so far, so good. Everything arrived in great shape. I played with the paints that came with it and they worked well. I've also ran body paints through it and it works great with those. I even ran food coloring through it the first time I used it (as a cake decorator I have a similar compressor at work.) This worked just as well as my trusty old airbrush compressor at my bakery. For this price and all of the items included this is a great deal on a great compressor. I am just a beginner to airbrushing so keep that in consideration. The compressor isn't to large so that is a plus. It has an automatic shut off which takes some getting used to. I also prefer to keep it on the floor when I am using it as I could see the potential of it vibrating off a table top if not secured into place. I would say the only complaint that I would have is the lack of literature that is sent with this system. If I was a total newb then I really would have had no idea what to do with it.

If you are looking into getting an airbrush for any reason, this is the perfect starter kit.Painting 3D profile RC planes.While I can see its limitations, I can also see having a couple of these guns around for base coats alongside a higher quality gun for better detail work. The Master G22 will do fine lines at about 20psi just fine. Most other detail work was done at 20psi, spray coats I turn up to about 35psi for covering.The compressor keeps up just fine, no issues whatsoever.I did have to use a washer on the moisture trap to mount the trap vertically other than that it has worked perfectly.Air hose is decent quality, nice and flexible.Enough base coat colors to get you started.Overall I think this is the best 95.00 I have spent in a long time. I WILL be buying a couple of G22s to have around alongside an Evo for finer detail.

Airbrush is cheap and nasty and does not allow good coverage with the paints supplied. With good quality paints (AK Interactive or Vallejo or AMMO by Mig Jimenez) the brush does well. It does spit occasionally which can ruin a good paint finish, but not disastrous with these paints because they can be wiped off easily.As a starter kit this is awesome. I ended up buying a better Iwata Airbrush

Me gusta que no es ruidosos , me gustaría que traiga un recipiente de aire un poquito más grande , así no tienes que cargar casi de seguido.

I wanted an airbrush to paint some models and this one had decent reviews. I knew this airbrush/compressor kit was far from a high end kit, but I assumed it would meet my expectations. I also assumed the compressor would be loud for being so cheap, but I was pleasantly surprised how quiet it is. The airbrush feels solid and has a smooth flow of paint. The double action trigger works well. The only negative so far is the lack of instructions. When you disassemble the airbrush for cleaning, pay close attention to the orientation of the parts so it works when reassembling. Even knowing how to put it back together, it is still hard to get the trigger mechanism to line up properly. The compressor does get hot after extended use. Just to be safe, I did put a book under it to keep it from possibly burning the carpet.Im sure the higher end models of airbrushes are better, but for my current needs, it is near perfect.

This was a great purchase. . . much easier to use and more reliable than some older airbrush setups I've worked with in the past.

Bought this airbrush to paint and detail a model railroad. I've got experience using airbrushes (inexpensive ones that use canned air) but I wanted something better. The compressor is quite nice, and the air/water seperator lined up correctly and sealed tightly. After a couple hours of intermittent use (2-3 minutes spraying, 2-3 minutes rest) it got warm but not too hot to touch. It is suprisingly quiet also.The airbrush itself is the reason I deduct two stars. It is junk. It worked fine for the first hour, then I cleaned it and took a 15 minute break. When I returned, it worked for about 15 minutes and the tip clogged. I'd spray a few minutes, clean the tip, spray a few more minutes, clean the tip. Finally, it decided to fail by ejecting the tip and blowing all the paint in the hopper out of the top. I'm keeping the compressor, and buying a quality brush.

i like it but the hose was short which i’m sure i can order a longer one so no biggy! I sprayed my Kohart vest lol it says “GREAT KUMA BEAR” In japanese cause i follow my dad in jujitsu

This air brush is great, I do custom dolls and I can't believe how easy it was to learn how to work and get started on a project. It was also delivered on time and package with care.

Fast shipment great product. The compressor is quieter than what I initially thought. I recommend as this product because it doesn't cost an arm and a leg.

AWESOME PURCHASE! thanks for the expedient delivery!

airbrush and compressor parts equal to a professionnal one, just one inconvenient , gauge and water trap not fitting the right way in compressor. the water trap and gauge become upside down ,need to put more silicon tape to get it installno adaptor to use another airbrush.from a different company. at least every parts of the kit are a very good quality.for the price 99$ but they charge 44.00$ for shipping and handling, but doesnt mention a supplemental of 23 $ charge by the canada post for the duty and tax....so the final price is 167 $ not 99$....anyway a great airbrush kit who has to be very recommended to all, for the price and quality.. i receive it inside and before the shipping date so its fast enough.. i really recommend this kit to all.at the begginning i talk to someone at amazon and give him a 5 stars .

good one