DisneyMickey Mouse Mug Warmer with Mug by Select Brands - Mickey Mouse Cup & Coffee Warmer Plate - Gifts for Disney Lovers - 12 Oz

Cool

Secret Santa gift for office co-worker who loves the Mouse. She was thrilled and said it works well keeping her coffee warm.

I Love HOT Coffee! I've had this coffee warmer for years. It delivers better than I expected even to this day. Measuring with a thermometer it gets as hot as 259 degrees steady. When I'm in teams meetings people see my Mickey Mouse mug and wonder and I tell them straight up, "Best coffee warmer on the market". The only thing to remember is that if you suffer power outages due to storms, etc., -or- power surges, Its important to unplug when not in use. Only downfall is these coffee warmers are sensitive to power surges. So unless you have it plugged into a UPS with surge suppression this thing will go bad.

This cup warmer is the best thing for our tea drinking habit! We used to fix large cups of tea for my husband and I and then end up finishing off a cold cup of tea, having to reheat the same cup of tea multiple times in the microwave, or dumping cold tea down the drain and fixing another hot cup of tea. Now...we can have up to a 16 oz. cup, filled with tea and it NEVER gets cold! Or any cup up to 3 7/8" in diameter.....wich is actually a big cup! We have used a cup on this warmer that is 3 7/8" in diameter and the contents of the cup stayed piping hot. My husband has used a very tall narrow cup on this warmer and it stayed piping hot the entire time.The warmer does NOT have an auto shut-off or an in-line switch on the cord. The power switch is on the front side of the warmer and takes very little pressure to turn on and off. Do NOT put your fingers (or any other part of your skin) on the red warming plate once it is turned on. It warms up quite quickly and takes several minutes to cool off once the power is turned off as well. PLEASE USE COMMON SENSE WHILE USING THIS PRODUCT! When the fluid level is low in the cup, the fluid becomes more than hot enough to burn the inside of your mouth.....sip carefully!As you see in the pictures, I am using a different/larger cup that is thicker than the cup that comes with the warmer. This cup still stays piping hot. My plate needs to be wiped clean, but you can see that when it is on, there is a red light that is emitted from around the power button on the front. The picture of the bottom shows that there are rubber feet that are slightly lower than the cup warming device so that air can circulate underneath it. Do not block the vent on the bottom side. If you smell burning rubber then it is advised that you smell the underside to be sure there isn't an electrical short causing the smell of burning wire insulation coming from inside of it. The power cord is 6' 4" (or 64") long and also comes with a small velcro cord tie on it. That way, if the cord is too long, just tie the excess off to keep your area nice, neat, and orderly. I have had half a cup of tea (the cup in the picture) and the temperature is 130 degrees Fahrenheit.Several people have complained about a foul odor when they first used this warming plate. Yes, it was there. I would say that it lasted several hours but it was nothing bad enough to make us turn either of our cup warmers off or to stop using them. One review stated that this odor caused his/her drink to taste the same as the odor. We did not find this to be true with ours. I would think that this person may actually inhale lightly when sipping his/her drink which can make anything taste funny.I would recommend this cup warmer to anyone who enjoys a hot drink every time they pick up their cup. The plate wipes off easily with a damp rag. NEVER submerge the product in water!All in all, this is the BEST cup warmer I have ever seen or owned!

Cute mug, but the warmer fits almost anything and keeps the contents toasty warm. And its Mickey Mouse, so what more could a Disney fan want?

Edit 8/30/2016:These are both going strong! Note: I previously did the mod to the wife's (see below - I removed the mickey ears cover on the button after it got stuck from being dirty), then let her use my stock one. I just today decided to undo my mod because it literally shocked me! Luckily, I saved the insert.I don't think it's very dangerous, but it was also annoying to reach in and find the button when it was super hot. And this thing does get super hot (which I love)!Edit 5/15/2016:To fix the 'button pressed down' issue, I took the thing apart and noticed the 'disney' button was just a plastic insert that presses on the REAL button (a typical momentary switch). I love the low-tech way this thing is assembled - just remove the rubber feet and 4 screws, and it just comes apart. The rubber fit just press back in!Indeed, it was a bit of coffee gunk around the button rim causing the Disney insert to not slide smoothly. Instead of cleaning and/or sanding down the button insert, I decided to just remove the disney button! But don't do this! It'll shock ya if you're not careful. I was just pushing the 'real' button inside the unit (see pic) to turn it on and off. The LED inside is insanely bright.Edit 5/14/2016:Some observations after using 2 of these for 9 months (overall, these things are awesome for the price):Only thing I wish these had is an auto-shutoff - 2 hours would be good, or even a 4-to-8 hour one would be nice. I'm surprised nobody's burned themselves on it yet!Performance:The mugs are still lookin' great, no scraping-off of the logos!The warmers get VERY hot! Maybe too hot when the coffee level is low, as when the level gets down to about 1/2 cup or less the creamer starts to form a skin on the surface! So I usually turn it off when the coffee gets down to 1/2 cup. It's pretty gross! I haven't used other warmers so don't know if they do the same thing. It's probably good, as it keeps it warm when full and you can turn it off as it drains.On my kill-a-watt, this draws about 27W the whole time it's on. So within spec!Quality:I bought the 2-pack. Mine is still working well, but still stinks up the place with that synthetic smell! But I haven't used as much as the wife uses hers. Hers doesn't smell, but I'm not sure it ever did... Hers still works fine but has developed a problem where the power button is sort of permanently stuck in the down position. It has become difficult to turn on or off. If not left in exactly proper position, it will even turn itself on or off. It's become fidgety.I should note that she's left it on many times for many hours, and it has no auto-shutoff - so the issue could be due to all that extra bake time! There may also have been a small amount of spillage into the switch, judging by the amount of dried coffee residue on the main tray. No definite proof of that though. The switch area is not sealed - there's a gap between the button and case for liquid to easily get in. Maybe they could have molded a little splash hood into the plastic above the switch to divert liquid. But hey, at this price, one can't expect perfection!--- Original Review 8/2015 below ---Very cute, and plenty powerful. The cup is quite nice.The heater is pretty smelly at the start as it bakes off whatever crap it's coated with, but that goes away after a couple few days of use. Hope I didn't get cancer from the fumes in my coffee!

I love this. It was a gift and when COVID came and work from home was the norm - it got swooped to be used on another desk. wah! so i bought another one. smile keeps coffee nice and warm. One setting. no thinking - except to remember to turn it off - the power button is right in front with mickey on it and a red light when on.

I LOVE this! My wife as a Disney/Mickey adult, I HAD to buy this for her desk. The burner/heater gets super hot! It's amazing. The cup is super cute. The size is perfect for a desk. And it's super lightweight. Would recommend.