2-1/2" Water Pressure Test Gauge, 0-200 PSI, Red Max Pointer, 3/4" Female Hose Thread, Rust-Free Corrosion-Resistant Case, Brass Connector, for Home, Garden, RV, Indoor/Outdoor

Had problems with my ice maker using too much water, overflowing the cube trays and dripping into ice container. So I wanted to see if I had typical or unusual water pressure. This confirmed my water pressure was fine, and it was the ice making unit that was to blame. They fill the trays based on time, 7.5 seconds of running water, not on depth of water in trays. You can adjust it a teeny, tiny amount, but not enough in my case. So I got a new ice maker. Its nice to be able to eliminate some variables with tracking down a problem

Worked well and gave the same pressure reading as the Plumber's. Red Max Pointer worked as expected.

Works good I would have gave it five stars but it did not come with Teflon tape like it said in the ad so that sucks but haven't needed any Teflon tape it's just a principal behind it

Our house had water leakage which came from a Hot Water Heater, that was over pressurized. Our plumber showed on his gauge to be around 150 psi. The old pressure regulator was no longer working, hence the high rate of pressure! Had new regulator installed and set to 55 psi. Now I check the water pressure myself so I know ahead of time if there is an issue with the water pressure. It is reassuring to just put this pressure gauge on the hot water heater drain valve to check. The last thing anyone wants is a leaking issue with a hot water heater because of too much water pressure! This gauge is so easy to use, just a minute and you know what the pressure is. So easy to screw on to the water outlet. "CARBO Instruments" is a quality company I trust! PS If checking your water pressure saves you a hot water heater or water damage, than it is so worth it!! For peace of Mind, I totally recommend it. PS As an ex pipe fitter, I can't think of being without this device.

An inexpensive and well built pressure gauge. Works well on any threaded port/hose connection to give you accurate pressure readings.

Quick and easy way to check your water pressure at a hose outlet. Needed to check water pressure for a new RO water system install, used this and in less then five minutes hat a reading.

Experienced random surges in water pressure periodically from my faucets following major plumbing work from what turned out to be done by a lazy and incompetent failure of a plumber. This device saved me at the brink of catastrophe. The photograph says it all. So for any home owner, add this to your toolkit for the infrequent times you have a new water heater installed or a main water line replaced.

Helped me diagnose water pressure issues. Not the best quality but will work for homeowner use just fine.

Excelente compra, cumple perfecto!

I'm a plumber of 20 years. The connector will not seal to a tap as the thread is not compatible with uk threads. I removed the tap connector (not easy as this is glued on to the guage thread. Why!?!?) and the 1/4 thread on the actual guage also doesn't match standard uk plumbing parts. This will not work in the UK. Do not buy!

Accurate and well made

good

Very easy to use and reading the top water PSI value.