JDMSPEED 60 Pound Shaved Door Handle Trunk Solenoid Popper Kit Street Rod Design to Pop Open The Toughest Doors, Hoods and Trunks 60lb

Works great for pig trap gate. Fires quick with plenty of power.

Works awesome on my custom ranchero for the tail gate .

It's the size of a starter solenoid! See photo, Ford 4.6L starter for reference. It's exactly 2 inches in diameter. It's way too big to use in my application as a trunk popper. It'd probably weigh down the trunk lid and take up way too much space in an already-small trunk. Although I didn't measure the current draw, I can imagine it would be a lot. So I can't hook it up directly to my remote control module, either. I would highly recommend using a relay if you are going to power it with any kind of control module. Also it doesn't have a ground connection, so it must be grounded by the bracket that holds it.I can't honestly remove a star for this, it's my own dumb fault I didn't look at the picture with the dimensions.

I used this for a door latch popper on my Prevost H3-45 bus conversion. Pops the door latch with power to spar. A note about using these, leave a little slack in the cable, you want to get the magnet moving to get maximum pull.

It didn’t fix my problem. Not sure if it worked still have the same problem

Worked as expected timely delivery

Used this for a truck latch popper after shaving the outside latch in a 46 Ford coupe. Works great, plenty of pull.

So works good, I would strongly suggest not using the cheap button that comes with the kit unless you are using it on a relay. I used the steel cable that came with it for a little bit till I started having problems after 6 months. I Replaced it with a threaded rod and turnbuckle instead. Lastly the shaft of the solenoid stripped and resorted to welding it in place since I have a turnbuckle for adjustment. All in all, good for the price for the bracket and solenoid.

Lo instale y esta trabajando bien

Received Jan 31st. Did not install until Mar 4th. Seller was no help after asking for tech help, only told return window was missed. Promoted as 60 pound door puller, instructions say 50, but doubt it pulls more than 10 pounds. Would take up cable slack but would not even budge the latch. I changed the design, made a boomerang shaped lever and got it working. But am a little pissed at seller, if you know nothing about the products you sell, I do t think you should be a retailer selling. Lousy seller.

Installed in tailgate works great

Received what I ordered