PC Products Dispensing Gun PPM-300 for PC-Super Epoxy Adhesive Paste, 300ml, 991503

I needed a Strong epoxy to hold replacement iron stair balusters (330 of em) into wood base and railings. This stuff is great. The set time makes it so you don’t have to hustle with fine adjustments and the fact it doesn’t drip or run, which is particularly important where the top of the balusters are inserted into the bottom of the rail. excess cleans up with acetone and a little elbow grease.No budge, and the end result doesn’t move at all unlike the old wood ones that were nailed and wood glued.Great stuff, I am keeping a few spare cartridges on hand for random repairs.

Probably one of the best glue/epoxies I've used over the past 30 years of extensive DIY work. Just the right blend of stickiness, non droop, and workability when applying. No way is this "clear" though. Definately dries to a milky white. I used this to epoxy in place iron balusters into a drilled wooden handrail on top and a base strip on the bottom. Was perfect for that application because there was very little drooping/running from the top holes. Dries HARD and I pity the person who ever has to remove these balusters in some renovation in the distant future.

Like a number of other reviewers used this to fix new metal stair spindles. The consistency is quite firm initially but still easy to dispense. Not very thixotropic and does drip down vertical surfaces though meaning clean up needed when applied to the top of the spindles. Initial set after 20 mins or so but the good thing is it stays a little workable as it gradually sets hard for an hour or so after that. If doing a stair spindle job I would say allow 1 tube per 15-20 spindles depending how sparing or otherwise you want to be.

Great epoxy and at a great price. The epoxy is not runny -- a little thick like mayonnaise, thus works well on vertical and overhead applications. It is not clear, it is opaque and drys accordingly. It works exactly as described, non-runny, reasonable work time and extremely solid when fully cured. Each package comes with two nozzles, but, so far, I have emptied each set of epoxy cartridges on my projects and required only one nozzle per cartridge. I used PC Products PC-Super Epoxy to secure balusters and spindles (wrought iron) to finish my interior custom railing project (wrought iron secured into cherry railing). Super solid, super safe and looks fantastic!!! If this is the type of epoxy you need for your projects, PC Products is an excellent choice. I wish I would have found then a couple years ago.

I bought this for repairing ceramics, after tiring of crazy glue. Decent working time, clean up and bond strength. Dispenser has indexed cap that allows for easy squeeze out and preserves unused epoxy. Helps if you draw the plunger back a bit to pull epoxy up before replacing cap.

Needed an epoxy with a little longer working time. 15 minutes was perfect. Material was still pliable but not workable after several hours but was fully hardened the next day. I liked the container design as well as it keeps the tips fairly clean and easy to reopen. I've used this for a few repairs now. I will buy this product again.

Years of searching for the right adhesive to fix the odd things around the house have always been met with frustration. Isn't strong enough. Doesn't cure quickly enough. Requires lengthly holding for the adhesive to hold itself. Messy. Or worst yet... use a little, and then you can never get the cap off the next time you go back. This adhesive solved it all, and I can't imagine using anything else.

Ordered my Second tube of this adhesive; it has repaired every item I’ve used it on from ceramic planting pots to patio umbrella support arms. It works exactly as described! My only suggestion is to provide an applicator; I use a popsicle/craft stick. My only tip to you is to understand if not applied carefully it will leave clear yet visible residue.

Good product but after several uses the nozzles became clogged and it was difficult to squeeze out equal amounts of the resin and hardener.

Did the job

i've used quite a few different epoxy glues in my career. this one is one of the nicer ones. right away, impressed with the dispensing syringe. not cheap like most others and a great seal. The glue dries hard, but if left in water, will soften.

Good strong epoxy. The 15min work time might be a little generous, it starts to get very thick and viscous after about 10 min, at 15 min you better be done spreading it where you want it to go. This can also depend on the ambient temperature. I have used other PC epoxies and they all have performed very well.

Works well with other epoxy cartridges too. Other than a bit of waste epoxy and syringe tip, this is probably the fastest way to epoxy anything. Be sure to shop around to get extra tips. You do not need the super long tips like the ones pictured here for proper mixing, the shorter green tips work just fine.