Skullduggery Cast & Paint(R) 2 lb. Perfect Cast

This is a good very good product. It was my first time using any type of casting material. It worked the way I was hoping. I used it a little bit differently than most people, though. I didn't pour it in a mold. I brushed it on styrofoam. I made it thicker as a paste so that I could shape it as it was drying and use it as a filler in spots. I then brushed over it again and it dried nicely. I was going to make a mold with silicone and then pour the casting material, but I wasn't able to make a mold because the 'master models' - (ornate decorative cast iron ornaments) were 20 feet up in the air and I didn't have time to apply a bunch of coats and let them dry in between for the mold to set. I was able to measure the broken areas and along with taking a bunch of pictures, I was able to get an approximate scale to shape the styrofoam. My husband is a mason contractor so he will be the one securely fixing them into place and then painting them. As far as the PerfectCast product, it worked great to coat the foam and I was pleased with the quick drying time....

Easy to use. Setup nice and the mold was very detailed.

We are impressed that this is tough enough not to break/crack or crumble at all when you’re trying to get it out of the plastic (for retainer). It’s as hard as concrete once it dries. Makes really good impressions with very few air bubbles once you vibrate it to get them out. Also, if there’s any small bubbles it’s no problem to fill them after the fact. It’s difficult but not impossible to remove material if you need to (since it’s so hard), mostly because scraping it gives me the heebie jeebies (chills, like nails on a chalkboard). But that’s just me.

Works great for my needs but removed a star as the price has gone way up and you get less product. 😕

I love this powder I made a few figurines with this product and they came nice I mean there was a few air bubbles but I’m still learning this product but it’s very so I will get it with some practice! It’s well worth the money. Still trying to see what I can color with it. Will be trying paint and powders to see if that works

I didn't really think that this would work. But it did. It has held up very well for months and is very strong. Laura

Ive been using Plaster Cast, gave this a try. More water is needed in your ratio 3:1. But the bubbles, way to many bubbles, even let it sit a minute or two before pouring into my mold. Tapping and tapping, more tapping once in the mold. Now maybe if I had the vibrator thing, that might have helped... After I demolded, so many bubble holes I had to fill. Its not worth the extra time involved. Glad I only purchased the 2lbs. I will go back using the other, which still left a few bubble holes, but a better use of my time and money.

I have never used any plaster material or molds. I mixed this up per instructions on the bag poured it into my mold (a stone mold for painting mandalas) and I was a little too short so I quickly mixed up a little more and poured it in. I was a bit skeptical that it would turn out at all but, to my surprise it turned out perfect! No air bubbles, very smooth and was ready in about an hour. I would definitely recommend this product.