Bachmann Industries E-Z Track 6 Single Crossover Turnout - Right (1/card) N Scale, Grey

A tad expensive but worth it. Great switch for getting from one track to another. I wired my to run in tandem, so when I throw one switch, the other one also switches. (Less buttons is a good thing!) You will probably need to get two of these. Spaced appropriately, you will find multiple uses for these switches.E-Z Track blows away anything I ever had as a kid. N Scale is pretty small 1:160, about half the size of HO so having track that connects easily and stays together is absolutely necessary! This track is great!

I have bought 3 of these crossovers and all three are poorly made. The springs are not strong enough to hold the switch in place. The gears are never aligned propely. The frogs and rails cause significant problems for engines and cars.These crossovers are so bad that they take the joy out of the hobby.

My first cross over set was both the left and right cross over in one track assembly. I was worried that putting two separate left and right cross over tracks would not fit together the same as the no longer available single unit. I had no problems with the working or length of the two units together though attaching the needed wire underneath need a little work as it was a very very small screw.

Extremely poor quality control. Required repair before use. One of the switches still binding and will only switch in one direction electrically

Fast shipment works well

The crossover switches came on time, but both switches did not work properly. So I sent it back for a replacement. The replacement came, and one of the two switches doesn't work properly. Now I'm sending the 2nd switch back. Normally, I would give up at this point, but I really need this crossover in my layout. So I'm going to give it one more try and ask for a 2nd replacement and see how it is.

I purchased a pair of these, and even after powering the frog the engine would stop on the switch every time

not very good I already switched to kato