JessEm 04301 Clear-Cut TS Stock Guides – Precision Table Saw Stock Control with Roller Bearings for Safer, Cleaner, and Accurate Cuts

The media could not be loaded. This product, although is a little pricey, is Haley worth it for many reasons.First of all this set up, will allow you to effortlessly rip anything through your tablesaw and you don’t have to continuously fight to keep it against the fence or laying flat. Even if you let go of the piece being ripped, the Jessum guides will prevent the material from being allowed to be shot back at you and this is also a extra form of safety not only does it prevent material getting shot back at you, but it will enable you to provide perfect cuts effortlessly every time. Especially when cutting a 45 bevel on the tablesaw, it tends to always want to lift the board up slightly off the table and will cause irregularities in the width of your piece as it rips the 45 bevel, but when using the Jessum stock guides, they keep the board perfectly flat, and give you a effortless time, pushing the peace through the tablesaw .I’m not sure if the price just went up to 300 bucks but I did get mine for around 250 only a couple months ago so seems like prices are just going up everywhere for everything but either way I would still even paid 300 for them.I’ve been thinking these things would probably be a great addition to any jointer as well the router table for sure. Although, I don’t think they’re quite equipped in strong enough to be used on a shape or at least, depending on what exactly you’re doing with the shaper, but as for a tablesaw router table, and possibly even jointer planer addition, it is going to be one of the best investments you’ve made in a long time.What I really also like about Jasons products are they do not seem to rust and/or corrode like many of the other big companies these days like Grizzly rikon in the lot. They have a lot of tools and products made that have to be maintenance and oiled and cleaned or they will rest up easily while I’ve had many Jessum products like this one, and they do not even need to be treated. They never rest and are very very well-made And in the situation you truly do get what you pay for and that’s a quality product once again from Jessum.

I have figured out how to install these with a tall fence. Complete a mock layout and mill rectangular pockets allowing some adjustments depending on blade height. These work great and drive the material toward the fence. The pictures on Amazon seem small to the actual guide. The shaft is .700" diameter. The 2 screws on the front allow length increase from the shaft to wheel centerline. These are very well made. Highly recommended.

This product was well packaged and arrived undamaged, a feat in itself. The JessEm stock hold downs were fully assembled by the manufacturer. All that was required was to install the mounting rail on my table saws fence. As fence construction varies ill not detail my particular modifications, they were minor. A great deal of thought went into the mounting rail design and making it simple for the consumer to install. Every tool and fastener was included except for a drill motor. I made sure to set my mounting rail .812 back from the face of my fence so the hold downs can be swung out of the way without removing. I work on furniture in my home shop this requires me to transition through different set ups on the saw rapidly and frequently. The ease of setting hold down pressure and location could not be quicker or simpler. Stowing the hold downs is just as fast. The manufacturer chose high quality components and the machining is excellent. Fit and finish are other manufacturers of similar products should strive for. If you are looking for a set of hold downs to increase your accuracy and safety to the ripping process buy these. They wont disappoint. I was not compensated for this review. UPDATE: Have used these many times since installation. The simplicity of use and flexibility of adjustment is fantastic. An added benefit I began realizing right from the beginning: the smaller pieces of stock are held in place on the table after the cut is complete. I don't have to chase small pieces behind the saw any longer.

I read some reviews on Amazon about the JessEm Clear Cut table saw guides and thought it would be a great safety feature add on to my table saw and it does work great. Takes some getting used to, working around the guides but I made a push stick that easily maneuver's around and under the guides to push small stock through. I used a modified base using mag-switch mag jig magnets to fasten the guides to my table saw fence and it works great at allowing me to remove and install the guides as needed. Invaluable safety tool for assisting with the in and out feed of the wood through the saw blade and guiding the wood against the fence keeping it snug and avoiding kickback!

Saw guide delivered within 7 days with priority shipping from the USA.The Jessem saw guide is a fantastic addition to any table saw. it was easy to fit to my table saw fence although I did have to drill holes for the screws in my Biesemyer fence, there are alternative ways of mounting the saw guide using magnets but the cost of these made me opt for the screw method.The saw guide does a great job of keeping the material being cut against the fence and down on the table, far superior to feather boards, its not cheap but very well engineered and manufactured and I have no regrets in buying it.