POWERTEC 3" Fence Flip Stop for Table Saw, Miter Saw, and Drill Press, T Track Accessories for Woodworking, 1PK (71367)

so far so good

I returned this because it didn't fit the Powertec mini crosscut sled, but this stop will work with their regular t-track and is well built. I would buy it again for another project.

I built a crosscut sled for my jobsite table saw to help dial in more accurate cuts. I used Powertec t-track on the top of my fence and this fence flip stop is perfect for making repeatable cuts. The flip stop flips down to slide the board over and then back up before making the cut to avoid your piece getting pinched against the blade. It easily tightens down and loosens. It also glides nicely in the t-track. It’s exactly what I was expecting

Installed on a DIY table saw sled with t-track. Works fine. If zero deflection is a concern for you, this isn't the solution. If you're careful when pushing your work piece against it, and don't slam the piece against the stop, it works fine. Well made with quality parts. Working great on my saw. I drilled and tapped some holes to support a magnifier to work with a tape measure. The material was solid and accepted the tap very well.

Nice and useful addition to a DIY router fence. The ability to quickly and easily flip this stop for wider fences is perfect. Fence I built is actually two fences. Outer fence is two halves that adjust opening to router bit being used. The inner fence is a long solid piece with 4" cutout for bit and dust extraction. Both fences of 3/4" material. This stop mounts on rail on top of inner fence. Can be flipped for use with both fences. Works great!

I attached this to my crosscut sled and it works perfectly. You can adjust the flip stop to be as loose or tight as you like when raising or lowering it. Once you tighten the knob the entire mechanism is completely inert, so there will be zero variation when using it as a jig for accurate repeated cuts. It fits the Powertec t track perfectly and slides smoothly. I have no complaints, and no recommendations to improve the design.

Works as described

I purchased these knowing beforehand that they DO NOT fit the Kreg router table T-track system. As you can see in the first picture, the T-bolt is about 1/16” too wide. I remedied this easily by simply sanding down the edges about 1/32” on my belt sander. It took me all of just a couple minutes and then they slid in perfectly. For $12 a set, that’s worth the small effort to make them work.

Excellent purchase in all respects. Quick, simple and very functional. Very happy.

Muy bueno

Belle qualité. Ajustement parfait.

Muy buena calidad y prácticos para cortes repetitivos Recomendables para usar con sistema T track

Quality product with accurate description. I build my saw sled before this unit arrived, based on the dimensions provided in the description. (Risky!) However, it fit perfectly. Solid and well made unit!