Hopkins Towing Solutions 56200 Plug-In Simple Towed Vehicle Wiring Kit

This kit has everything you need for an install on a jeep. Expect to take a few hours to do the routing of the wires- A Saturday should be put aside to do this project. I highly recommend a pre-packaged kit like this specific for your vehicle that just plugs into the existing wiring harness - it significantly helps the installation. Jeeps are easy to work on and access, just take a little time to figure out the best routing and have a bunch of zip ties available and you should have no problem. This comes with all the parts you need to install it in the base configuration to allow the fundamental functionality of brake lights and turn lights. I added additional wiring and fasteners in order to hook up the 12 V charging line to enable me to provide power for recharging the battery of the toad as well as power from the battery to the blue ox supplemental brake at the drivers position. A key thing to doing this install is having some sort of snake to allow you to snake the wires through various members of the frame. I also found the mechanic type long hemostats that I have in my toolbox to be helpful at various points. Straight forward installation if you plan ahead a little bit. My jeep has a towing package installed from the factory which did not cause a problem. I did have to call product support which was very helpful to help track down a grounding issue that was easy to resolve.

Excellent, simple product! I've previously wired a tow vehicle with lighting and spent nearly a day pulling wires and installing auxiliary lights. I saw this product for my new tow vehicle and thought I'd give it a try. 45 minutes...that's it! Super simple installation with the biggest challenge in routing the wiring up front to the pull vehicle connector, which only took about 15 minutes. Highly recommend this. You should have a modest level of mechanical skill to install. A shop should be able to do it in under an hour. Installed on a 2015 Jeep Wrangler

Very pleased with the quality and price of this product. Installation instructions were generic and not vehicle specific, however, with the help of You-Tube I was able to install the harness. It took me longer than anticipated, but that seems to be my norm. Some knowledge of simple trailer wiring is beneficial. Once the product was installed it worked perfectly. Wiring from the rear lights to the front of the toad / dingy was time consuming as there were no specific directions given on the instruction card. I would recommend this to others as it works well and is inexpensive. Doing it myself saved me $150-$200 in comparison to having an RV dealership or trailer hitch shop performing the work.

Simple install. Plug and play. Made to last. At a great price.

perfect fit 2010 Jeep Wrangler Sahara, instructions were easy to understand the hardest part of install was routing rear to front trying to find a good unobstructed route, otherwise very easy, installed this and new rear bumper in about hour. If you have to tow your Jeep, this is absolutely hands down the most efficient and cost effective product, and does not interfere with any electrical does not use Jeep battery, power is supplied from tow vehicle. Works perfectly, don`t choose anything else. Delivery was very fast. Thanks

Really easy to install {have a hoist} works Great !

It now connects my coach to my toad.

Installed it in a 2013 Jeep. There are two harness connections in the drivers side rear tail light. The instructions wasn't clear which one to use so I had to watched a youtube video. It works like it should.