DOWNLOAD THE APP
Customer Services
Copyright © 2025 Desertcart Holdings Limited
DOWNLOAD THE APP
Lead-Free / RoHS 3 Compliant / REACH Compliant Product Highlights Safe for Use With Electronics Seals, Bonds, Encapsulates Resistant to Various Chemicals and Oils Non-Corrosive, Non-Conductive Flexible, Durable, Non-Degrading Withstands Moisture, Vibration, Abrasion Common Uses Protecting, Sealing and Insulating Corrosion Sensitive Electronic Components and Electrical Materials. OEM Commercial and Industrial Manufacturing for Flexible Permanent Bonding and Sealing. Instructions Surfaces should be clean and dry. Unscrew cap, cut the tip off. If tooling is required, do so within the first 10 minutes after dispensing. Apply the silicone to surfaces and remove the excess silicone after tooling with a dry clean cloth. Allow the silicone to cure completely. At room temperature, 25C (77F), and 50% relative humidity, the silicone will skin in 10 minutes and fully cure in 24 hours (1/8" bead). The silicone will reach its maximum adhesion in 7 days. Higher humidity accelerates curing. Specifications Meets and Exceeds: ASTM C920, UL Recognized VOC: VOC Compliant (36 months Transportation This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life. Review: Works well - In building vintage tube amps, I needed something that would hold down caps, lock fiber board insulation in place. I could not find the stuff recommended from the hardware store. This worked really well and I use it constantly now. Review: Great Product... Set up time requires patience. - I was looking for something to secure torroidal cores/inductors and a transformer to my PCB on a radio project and it was easy to apply. Precise application (a dab on components) and a dab on nuts to secure and prevent loosening. Give it a couple days to fully cure and it IS Tough! This has made my finished board more robust and durable for travel. Highly recommend. Some reviews are out and out inaccurate... this is NOT silicon grease and Not a Traditional Adhesive as in glue.... it is similar to a caulking sealant, only in a small tube for small applications.
| ASIN | B07PG9X9L8 |
| Best Sellers Rank | #23,573 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #55 in Silicone Adhesives |
| Brand | Chip Quik |
| Color | White |
| Date First Available | March 11, 2019 |
| Item Form | Gel, Paste |
| Item Weight | 0.01 ounces |
| Item model number | EGS10W-20G |
| Manufacturer | ChipQuik |
| Material | Silicone |
| Number of Items | 1 |
| Package Dimensions | 4.61 x 1.97 x 0.75 inches |
| Style | Industrial |
| Surface Recommendation | Electronics, Corrosion-sensitive materials, Chemicals, Oils |
| UPC | 708210647625 |
| Water Resistance Level | Waterproof |
E**E
Works well
In building vintage tube amps, I needed something that would hold down caps, lock fiber board insulation in place. I could not find the stuff recommended from the hardware store. This worked really well and I use it constantly now.
G**R
Great Product... Set up time requires patience.
I was looking for something to secure torroidal cores/inductors and a transformer to my PCB on a radio project and it was easy to apply. Precise application (a dab on components) and a dab on nuts to secure and prevent loosening. Give it a couple days to fully cure and it IS Tough! This has made my finished board more robust and durable for travel. Highly recommend. Some reviews are out and out inaccurate... this is NOT silicon grease and Not a Traditional Adhesive as in glue.... it is similar to a caulking sealant, only in a small tube for small applications.
L**P
electronics grade silicone
easy to use. drys quickly
N**S
Like the Doctor Ordered...
After shopping all around town, because the sales folks in our small community did not understand the usage of Electronic Grade Silicone. I as usual, turned to Amazon for the product I needed. Well it worked, the Silicone is holding in place, two MIcro-SD cards in a Hammond XK-5 with out the fear of the Micro's popping loose... The only complaint is that the Silicone is Black and not the typical Clear. I guess the Black shade indicates that it is Electronic Grade. Enjoy, dmc <><
R**L
Excellent
Excellent product
J**9
Great for sub amp repair
Works. I used this to secure some protect/secure some leads on a repaired sub amp. No issues.
C**F
Safe for electronics!
This worked very well for installing a pcb in a housing and attaching it securely. Regular silicon or RTV will attack the pcb traces - this product will not.
M**N
Not an adhesive
This product should take the word “adhesive” out of its name. I tried to apply it 4 times and gave it time to dry. It broke off so easily each time.
J**D
i dont think these should be called adhesive if they dont even bond as well as B-7000s. these are sealants used for sealing small openings or gaps like in between phone screens and chassis. for that purpose it does its job well.
P**R
good product, but tubes tend to split at base seal
C**N
Muy rápido a llegar, y perfecto medida para un proyecto com muchos componentes para afijar, lo recomiendo
B**.
Worked great but, the back end of the tube failed so I had to scrap the silicone that I did not use on the first go.
I**S
Realiza perfectamente su función, este tipo de siliconas de grado electrico son ideales para sellar soldaduras de estaño.
Trustpilot
2 weeks ago
1 month ago