Rosewill ATX Mid Tower Gaming Computer Case with Tempered Glass and Fans, Up to 240mm AIO and 440mm VGA Support, EATX Support, Top Mount PSU & HDD/SSD, White - Prism S-LITE

The media could not be loaded.  I am very pleased with this case and excited for my build. There's a lot of room inside if you aren't doing AIO cooling, but you will need it if you are. The cable management is better than simpler cases I've dealt with but was a bit fiddly. The standoffs were configured for ATX sized board but we're easily moved with an included hex nut to support all 8 mounts on my ASUS ROG STRIX Z490-G mATX. However, the clearance between the RGB shroud on my mobo and the back rgb case fan is not very large and the fan obscures a good portion of the ROG STRIX logo. For standard PCIe mount graphics cards the case includes a thumbscrew adjustable anti-sag support, but with the bottom case fans configured in intake mode I feel like airflow is a bit turbulent in this configuration. I am hopeful I'll be able to vertically mount my GPU once I get some additional hardware. I also planned to install a GPU AIO but there is no space to put it without additional hardware if you are using a CPU AIO. There is an additional 240mm mount behind the geometric front faceplate but it doesn't provide adequate space for a second AIO radiator, and in my opinion wouldn't be useful for airflow even for case fans (these could likely fit) without doing some dremel work on the case itself to improve ventilation and removing the faceplate during operation (simple to do with six clips behind the two side plates but tedious and much less visually appealing). I will update this review once I tinker with adding a bracket to that front mount to confirm if I manage to stack two AIO radiators over the 240mm vertical mount. The vertical mount itself can easily be used for 1 240mm AIO or 2 120mm fans or 2 drives (3.5 or 2.5). I love this flexibility and it feels like the case is well designed with that kind of expansion in mind. Beyond the vertical mount, the case comes with a 6-way rgb fan controller and space for two 2.5 drives behind the mobo and two drives (3.5 or 2.5) in a rack in the PSU shroud.

First off, this case is MASSIVE. Not a bad thing at all either. It leaves all the room and all the options in the world for upgrades. It’s absolutely stunning to. These fans look just incredible. A little noisy but I believe that’s due to it being plugged up via sata. It says it included a controller but I believe what they meant without specifying is it has a controller hub in the back that everything plugs into and looks like a cord that can plug into a remote device but I could be mistaken. My RGB is controlled by the button on the top AIO. Which isn’t an issue for me but I would like to do some research on it because it’s very vague and it doesn’t look like this case has been bought enough to have someone review it. Moving on, the build quality is tremendous for the price, it’s hefty and the construction is rock solid. I absolutely adore this case, and wish I would have got it sooner. The air flow is great, it’s very spacious for cable management. I really don’t have any cons about this case other than the RGB just not having enough information. Nothing in the manual really talks about it. They work, and are gorgeous so I don’t care at the end of the day. I would recommend this case to anyone.

Great case for the price. I went with the Prism S Lite because I already had RGB fans. It appears other users have had issues with the ones provided. I used the 240mm radiator bracket to support my AIO. This is a great case for a beginner or someone who wants the tempered glass look at a great price.Pros:-Easy cable management with plenty of tie down locations-Great cooling food GPUs-240mm radiator support- Plenty of holes to pass wires through-PriceCons:No filter for 240mm radiator intakeSince it is a positive pressure setup a filter for this location would improve the case. A simple 240mm magnetic filter would be perfect.

Pros:- Bottom intake. GPU (5700XT) Hot-Spot thermals in HZD have been reduced from 90C to 80C compared to my old case (Rosewill Cullinan). The bottom intake could be improved if some of the metal pieces were dremel'd off.- Very cool design. You can tell they took inspiration from fractal design's meshify series. The honeycomb cutout in the side is a unique touch.- Includes a GPU sag bracket, not usually seen in budget cases- Wide enough such that the lower intake fans do not interfere with lower connectors on ATX mobo- Front 120mm mounts for custom water cooling pumps.Cons:- No 140mm fan support.- Side fan mounts are definitely meant for exhausting air thru a 120/240 radiator. I'm using them as an intake which sucks in dust because there's no filter. I stuck a mesh inside the back panel to mitigate dust.- Rear fan cable will have to be routed behind the mobo to hide it properly- No opening for EPS cable near the mobo connector since the PSU is mounted on top. Will need to route it from further away- Metal feels thin. Case is study enough, but the material feels cheaper.All in all, I'm happy with the buy. Since it's a white case, took some planning and lots of zip ties to make it look clean

Was going for an all black sleeper build. I don't like RGB unless it's periferals. With the lite version, I believe get less case fans so i invested in 4 pmw case fans. Works wonders. Airflow is very good if set up properly and heat from the PSU just goes right out of the top exhaust for it. Cpu temps for my oc fx3650 never exceed 60 celsius even at full load. I really like the power button feel. High quality and feels sturdy. Nothing on this case feels cheap whatsoever. I've dealt with a lot of budget cases and byfar this is the best.TLDR; Don't know about the RGB one but the Lite version is 10/10. very likely gonna wanna buy extra fans. Comes with 2. Sturdiest and highest quality budget case I've ever worked with. Contends with the big boys in my opinion. Get this.

Shipped undamaged, extremely clean looking, high potential here. I chose this one instead of the fractal because the psu enclosure is on top and will lend itself well to a themed vinyl wrap. I will post pics once built. I’ve included pics that were hard to find of stuff I was interested in seeing

I'm honestly impressed with this case. While the materials feel a bit light and cheap, the overall look of the case is very nice and it's actually pretty well thought out. Easy cable management, tons of room for upgrades, and a simple assembly overall. Completely satisfied.

refined aesthetic, perfect mid tower, fits atx motherboards nicely. bought two, just found out newegg has it for 30$ less than amazon.

Recu 2 jours a l'avance pour le prix je recommence d'acheter sans hésitation

Decent case. Not so decent cable management.