UCTRONICS for Raspberry Pi PoE Splitter 5V [2-Pack] - Active PoE to Micro USB Adapter, IEEE 802.3af Compliant, for Tablets, Dropcam and Raspberry Pi 2/3, and More

I have 6 of these for my older Raspberry Pi projects that can't use the more modern PoE hats. Works well for continuous duty applications and doesn't get too hot.

These are a perfect fit to power up an older Raspi that does not have the header to use with a POE hat.To be fair, I have not put these through their paces to see how far I can push their current ratings. I bought these to power an older PI off the network that has nothing connected to it other than network and some temperature sensors. But for this, it has worked perfectly for several months now and does not produce much heat.Fair Warning Since It May Not Be Obvious:Both of the devices in this kit are to deliver POE to a device. You cannot put one on both sides of the wire to send POE from one to the other. These are designed to connect to a CAT5/6/7 cable that has the other end connected to a POE switch or a proper POE Injector.

Used this for Pihole and DB server. They just power up with the switch and the cabling is cleaner.

I’m powering several Pi 3s with these and they are performing as expected off a 500Watt UniFi 48 port switch. Cheaper than hats.

Been running solid for over a month. I bought this to minimize wall worts for my network rack. I am running an rPi 2b as a Ubiquiti Unifi controller and have this running from the Unifi 60w switch. Yes, it does take up a POE port but in my case it was worth it as the network is on a UPS and saving on one more plug helps keep things simple.

Nice way to add POE to a raspberry Pi. Bought a few, others used to power a Wyze cam until I upgrade cameras. I would buy again... actually, I did. Lol

These are great for powering my raspberry pi's. They have helped me get rid of all the cord clutter. An added bonus I found out about is that I can use these to power Chromecast and firestick devices by using the firestick Ethernet dongle.

The ability to run 1 cable to power and secure data transfer, what's not to like?I was slow to adopt POE. Now, I'm running all my Pi's and Unifi AP's on POE.

Hubitat hub and lutron caseta hub are now connected to a POE switch (Netgear JGS524PE), without a single problem. Just plugged a cat6 lan cable to the splitter, and voilà... No config, no errors, a true plug and play !

The media could not be loaded.  It does not work on Amcrest Camera IP2M-841W-V3 with micro USB connection. No power to camera. I may have received bad cables. Bad luck.