3D Solutech - PREPLAWHITE Real White 3D Printer Premium PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG)

Maybe I just got a bad roll. I bought 2 of these and have not opened the second one. This is the Real Black color. The roll was nicely wound, but that doesn't matter if it does not print well. Several failed prints. I looked over the entire printer and verified all the slice settings. I even resliced a few times and reinstalled my slicer in case there was a software issue. I printed the same file with the grey/silver solutech just fine before and after. The problem is 100% the filament. Just ramdom missing walls and delamination. I would expect delamination from ABS if the room is cold, but we are talking PLA! I have used 3DSolutech black before without issue, but I am wondering if this is genuine solutech or if the quality is hit or miss with this company. I will gladly pay more for filament that works. Gonna try something else for sure from here on out. Waste of money and time.Edit: Only 1 of the rolls was bad. I will still get this from a different source though. I suspect the storage is to blame. Would have been nice for the vendor to reach out to someone that gave 1 star to try to make it right...####Second edit####I made a mistake. I have written the above in error. I am so very sorry to have given this a bad review. I made a terrible mistake. The issues I experienced were from my own ignorance. It turns out that I made a newb mistake. I hope this info can help others. I print on glass, and was using 91% alcohol to clean my print surface. I switched to 70% and it worked better. What I found was that all I needed to do was to take the glass off and wash it with soap and water. The filament is wonderful, my inexperience caused this. I will continue to buy this filament. I have clocked nearly 12 hours of print time again after washing the glass and have had no issues with the same roll I said was bad. It would have been nice for the seller to reach out to me though.... If you have issues with this filament, look over everything you are doing. I have tested all the rolls I though were bad. They are not. This is a great bargain.###3rd Edit###I have found that other errors I was making was tweaking settings in my slicer that I should have left alone. I have now printed a ton of prints ( really just a matter of Kgs, lol) I love this filament. I have not even had to re-level my bed in a loooong time. The adhesion is very nice. I have purchased several of these rolls and love it. Will keep on buying as long as they don't raise the price on me.

I stumbled across this while on 3DSolutech's Amazon store and jumped at the chance for a shot at their "premium" PLA for $13. It hung out in my bin until today and ran it through some of my calibration prints and I have to say, I really like the way it prints. It's got a PETG look and feel with PLA ease of printing.NOTE: I bumped up the temps for this 5-10 over their normal PLA with great results.I'm becoming a big fan of 3DSolutech's filaments. My favorite is their denim - so much so I'm re-printing my printer upgrades in it. I just got a roll of their regular Black PLA and I have great expectations from it as well.Minor update White: these prints are tougher than normal PLA, flexing but not breaking and seems a little lighter than PLA. I may print some wheels for my HPI WR8 out of this.REVIEW - BLACK:(Amz won't let me write separate reviews...)Wound beautifully. The black is as good as the white, just as I expected. I'm reluctant to admit I got a roll of the Sunlu Gray PPLA that everyone raves about but I just can't get reliable first layers like I do with 3D Solutech. I feel like a zealot, but these filaments ALWAYS work for me. Never had a clog, no burnt discolorations, wide temp performance and the only complaint was a VERY mild color shift on the baby blue (seems somewhat common) but it's always completed a print for me.When I was printing on the factory glass, I was printing at 210/60 with mirror smooth results on the face. I just got an EZMat and I'm printing at 210/35 and it's working just as well.

This has been a solid option for black PLA. I've gone through a couple spools now with little to no issues.The spools themselves have been great. Smooth edges to spin on the holder easily and the filament was put on the spools perfectly with no crossovers or kinks. Definitely some of the best spooling I've seen compared to various other brands I've tried.Color is solid and has been consistent through the couple of spools I've used over the last year or so. Gives the models a nice look with the deep black but just enough shine for some highlights to pop.Here is a model I printed on my Flsun QQ-S Pro @ .2 layer height, 195c print temp, and 55c bed temp. Model is from Myminifactory and by Eastman who has some excellent models available. Very happy with the outcome especially as it was printed fairly quickly. I can only imagine how it would have looked if I would have upped the resolution some.Overall I'm satisfied with the filament and will definitely be ordering more in the future.

Works well and had little to no issues printing on a Qidi Plus-X.The filament seems more sensitive to moisture absorption compared to Hatch Box. I didn't have any brittle issues with Hatch Box so far. I'm in Colorado so it's already decently dry. I've been able to keep one roll open above the printer for extended amount of time with no moisture issues. That is not the case with this Solutech filament.The Solutech has issues at any air exposed part of the filament getting extremely brittle. Luckily, I store the filament in the (not currently completely sealed/finished) Spannerhands dry box so only a foot or two of the filament sticking out and into the extruder got brittle. Had one bad clog due to this issue but was simple enough to fix.Great cheap filament but do not store in open air - even in dryer climates - remove the filament after each use if you will be leaving it resting for more than a few hours.

This was probably one of the best price to performing filaments I've purchased in quite some time, unfortunately it's no longer attainable at a decent price.

La calidad de este filamento me parece muy buena, mis impresiones salen muy bien. Recuerden que mucho del éxito de una impresión no solo recae en la calidad del filamento, pero con este es una preocupación menos.

This filament is awesome!! We usually use the amaz3d stuff and tried this because it was cheap and its so much better, it has a nice sheen to the finished print and the lines are so seamlessETA this brand overall seems to be a great choice, we've tried the grey and red since and both work very well too! My new go-to i think!

This print was done with a layer height of 0.32 and infil of 45% and nozzle 0.3this print turned out amazing! Great quality product and the deepness of this real black is well true! None of my other black filaments have been close to a deep dark black like this one and can print slightly faster and keep the black tone better than others

The media could not be loaded.  Sin duda alguna repetiré en algún momento, se que esto de los filamentos es cuestión de probar, porque hasta de una marca a otra cambia la configuración de acuerdo al color, pero en lo que respecta a este filamento yo lo compre en blanco y en verdad se me hizo una excelente opción, es fácil de usar y no tiene problema de adhesión, rara vez que no calibro la cama caliente al 100% tengo que usar laca pero de ahí en mas funciona perfectamente.Segundo rollo de Pla de este producto que compro y sin lugar a dudas volveré a comprar un tercero, me ha dado excelentes resultados.

Super consistent results with this filament - good adhesion to glass bed and between layers. Minimal stringing and a nice dark glossy black. I will definitely buy more when it goes on sale next.Using Ender 3 stock with Cura.