MOOG K160072 Coil Spring Insulator for 2000 - 2014 Chevrolet Tahoe

2011 GMC Yukon XL 4x4Fabtech 8" lift, front and rear Bilstein 5100 shocks, 35x12.5x20 RBP Reclusor M/T tiresI had to replace a broken coil spring on the back of truck.I purchased the moog springs as well. These insulators fit well and are holding up well. I purchased a similar set for our 2014 suburban. That set cured the clunking in the back. Definitely worth the money and excellent quality

I was the what I had ordered & it works great.

High quality, which is typical for Moog. Good thick rubber that replaced the torn old insulators. Completely silenced the groaning sound coming from the springs. Doesn't make sense to buy any other brand than Moog for suspension. They're simply the best.

I used these Moog Coil Spring Insulators with the Bilstein 199021 springs in the 2001 Chevy Tahoe.First I noticed that the center diameter (or cupped area) does not match the same size as the coil spring locator on the axle or frame. However the "cupped" inner area is the correct size to fit in the center of the coil spring. So I proceeded with the install under the assumption that the rubber insulator would just stretch over the spring locator (spring perch?) once the full weight of the car was pushing on it.I used 2 on each coil spring. They were put on top and bottom of the coil spring before placing the spring into the final location.The overall install of the springs was very easy. I did the following:- Loosened the wheel lugs- jacked up tahoe until wheels were no longer touching ground- placed jack stands on frame just forward of the tow kit mounting area- Removed plastic wheel liner- removed rear shock absorbers- disconnected passenger side rear sway bar upper link bolt to allow axle to droop further- Then coil springs could be removed by hand very easily.

these were installed in a Tahoe along with Moog 81069 HD coil springs. Honestly, Moog should just include these in a spring set. The pair of coil springs were seventy bucks, and 4 isolators added almost 50 bucks.. they are just rubber pads...

it was a match for there coil spring

Super awesome. What I love most about them is that before you install them in your coils you can put them up to your ear and hear the ocean. Just like a seashell. Cool!

Cushion for top of the spring was all that was necessary for my 2003 Envoy. None on the axle end of spring. Take bottom bolt off on shocks to allow most down travel of axle. This gets the spring pretty loose but not quite enough to remove it. I didn't remove stabilizer end link connection because I have spring compressors that got the inch or so needed to remove springs. Quality of the cushions seems great but time will tell.

They were the right fit for my hummer h2 we removed airbags suspension and put springs and they fit perfect and delivery was super fast

La goma es de buena calidad.

Really good product

When it comes to suspension, Moog parts are usually the way to go. A+

2002 avalanche