Washing Machine Carbon Brushes For Samsung Welling Motor

Working perfectly

So far so good.. bought as replacement for my Samsung ecobubble washer.. easy to instal, great match for the original. Washer sounds brand new now and is working better than ever.

Found the motor brush set to be a perfect fit for my Samsung Eco Bubble 12 year old Washing Machine, no mod's required, both brushes angle to the commutator were correct not opposite as reported by some reviewers. The brush holders did not have to be substituted with the old items, again something reported by some previous reviewers. Machine returned to fully operational state with very little effort and cost. Regarding durability, time will tell, the originals have lasted 12 years so can't complain! Unfortunately, due to insufficient time to diagnose the issue and pressing requirement for a working washing machine, bought and fitted a new Samsung, still, hopefully the old unit can be utilised by a relative, friend or a good charitable cause and provide a few more years of service.

Back to front angle on my set...had to reshape brush to fit properly.

Very good

Spent £8.29 on a pair of brushes in September 2025. It did indeed work and washing machine is running. Come May 2026, washing machine has stopped again and took brushes out and the one I replaced has completely worn out. The original samsung brush that is still in there is over 8 years old and still has half of the carbon left. Will not be buying this product again. I'll have to find another supplier.

Saved me from buying a new washing machine Samsung. My Husband fixed it in 10 minutes very well recommended to buy . Will definitely be buying again because I have another Samsung washing machine we are a big family plus cleaning business extra . Hope this helps you all .

Our Samsung Ecobubble (WF80F5E0W4W) started a wash cycle but the timer never counted down and the drum would not spin. Using the servicing mode managed to test the spin and the machine immediately faulted with an E3 error code. The high speed motor carbon brush was completely worn ( accessible directly underneath the washing machine ). 10 min job to swap over to these new ones and machine is working fine now. Correct fitting and alignment for an Ecobubble 8kg machine with a Welling motor ( you can find the motor make by the sticker on the motor underneath the machine. Hopefully this helps anyone with similar issues, a cheap £10 fix with a screwdriver and some YouTube videos.

I will order again 10pcs after couple of month