Thermaltake Core V31 Window SPCC ATX Mid Tower Computer Chassis CA-1C8-00M1WN-00

For the price, you really can't go wrong with this case. It has practically everything you could ask for and then some. I was looking for a good, rather inexpensive case for a new build and settled on the Thermaltake V31 after reading all the reviews and watching several reviews on Youtube. I liked what a saw, a lot. This was probably the easiest case I've ever used for easy cable management. There are cut outs and grommets just about everywhere. Routing cables was never easier with the V31 and I ended up with a very tidy build. I opted to give water cooling a try for the first time and it was easier than expected. With the radiator installed at the back of the case, there's plenty of room to use a regular case fan directly above it. On some cases, there's not enough room to do this. I particularly like the magnetic air filter on top of the case. What a great idea! I'm also glad there's room for two drive bays in front of the case. I always like to have an optical drive and card reader on my computers. I'm trying to think of some negatives but they are few and far between. The plastic window on the side seems a little fragile so I recommend using caution and not bump it and get it scratched. There were a few remarks about cheap thumbscrews.. but they seem to be fine and do what they're supposed to. The included screws didn't seem to be the right thread for the standoffs so I used some that I had left over from previous builds. I didn't want to strip anything or damage the mobo when attaching it to the case. The mesh design on the front of the case is very classy-looking and I like it. If you like fans, there's room for a ton of them and then some! I really think Thermaltake gives you a lot for your money in this under $100 case, so I'm extremely satisfied.

This case is one of the best budget cases... PERIOD. I build many computers a month for clients and I ended up buying this for my own computer at home. There is plenty of space for cable management, Airflow is excellent, Dust filters everywhere, Supports EATX (not officially), Rooms for CD drives multible desktop HDDS and SSD/laptop drives. The window does a excellent job showcasing your computer. This case is now the one I exclusively.My specs:I5-3570k @ 4.6ghz corsair h60EVGA z77 Classified EATX20gb RAM2x Powercolor 390 in crossfireEVGA 850 PSUmultiple corsair fans2x 256 SSDs1x 1TB HDD1x 3tb HDD

Got this for a new build. I like the open top as this is where hot air goes to and helps with keeping inside cool and gives the case a good airflow. This was my first case with cable management and I have to say it's a nice option. I'll never buy the old design again :) It's nice too see no cables when looking at the case from side window. The only issue I have is the blue power light is too dim. I thought mine was bad as others had posted it being too bright, got a replacement and it was the same. The hard drive cage could have been built better, otherwise overall a nice case at the price.

Great case. I used this as on a recent build using an i7-6700k processor, 32GB DDR4-2400 MHz Skillz Ripjaws RAM, M2 format 240GB Kingston HyperX Predator SSD as primary drive, 2x Western Digital 3TB media drives in RAID 0, MSI Nvidia GeForce 970 GTX graphics card, and Corsair H100i GTX liquid cooling system. Using the built-in overclocking 'tweaker', the processor overclocks by 15% and the RAM overclocks to 2500 MHz. This board is a beast and makes the whole Windows 10 PC scream. Benchmark test using Performance Test 8.0 come in overall at 6620 - which is five stars in every rated category. From off to Windows loaded is 8 seconds (minus the three second POST delay built in). The airflow of this case is a direct contributor to my processor staying a cool 35 degrees Celsius - well below the 50 degree operating temperature in the manuals. The case is large enough to mount the liquid cooling system in the front vertically, or on the top horizontally depending on your preference. The case is also large enough and pre-drilled for an ATX sized MOBO, although I opted for a mATX format ASUS RoG MAXIMUS VIII GENIE MoBo. With the wire mesh style case on the top, front and back, you can mount cooling fans in a wide variety of locations to maximize your airflow.

I was pleasantly surprised at the overall quality and features of this. I did some research on this before I decided to buy it, but i wasn't quite expecting it to be this good. The cable management is fantastic with plenty of room behind the motherboard to route cables. Plus, there are nice rubber grommets where the cables come out of. Being able to move the drive cage is a great feature to have, especially at this price point. I was able to put a Sapphire 390X Tri-X GPU without having to move the cage, but the option is still there. Being able to put two 2.5inch drives on the side side of the case, behind the board, was a great option to have to further help with having a nice clean case. I can honestly say this is the best case I've ever purchased anywhere near this price point. If you're against the wall, just pull the trigger. You won't be disappointed.

The external power button is poorly designed. It is a piece of plastic screwed the front face which presses the button that is wired to the motherboard. The lack of mechanical action caused the part attached to front panel of the external button to fatigue and break. I now have a case that will only work with the the front panel off and a refusal of warranty service since this is not classed as a defect.

This case has so many options. If you're looking to do an all in one liquid cooler, choose this case. I chose to go with an corsair H110i which has a 280mm radiator and it fit with plenty of room to spare. Everything about the case feels solid and quality (everything is metal).My cooling setup:-Corsair H110i 280mm liquid cooler sucking air in-2x 140mm case fans blowing out through the top-1x 120mm case fan blowing out the rearEverything is quiet and the inside of the case is a wind tunnel. Components are icy cold.

Good looking well made case. My only issue is with the power button, it is hard to see until you turn it on. I will try to put a white circle on it to make it stand out better.

価格の割には良く出来たケースですが、内部が少し狭いのと少しチープです。本格的に内部を光装飾したい方には、強化ガラスタイプをオススメしますが、普通に使うならとても良いケースです。

This case is way better than the ones my wife and I are using. Very happy with this purchase. Only complaint is that the tool-less screws on the back of the side panels are shotty. I feel like they may be stripped after several uses. So far they have held up fine.

Very nice case 2 ssd slots on the back that are sideways and 3 ssd or hdd slots near the front

Great case, roomy, love the removable dust filters, good cable management, appealing to the eye.