Question 1

Will this tool fit a 2002 F150 Crew Cab?

Accepted Answer

Would not fit the aftermarket headlights in my 2003 F150. They have 4.5mm adjusters and this tool is 4mm. Measure your adjusters with a caliper before ordering or buy local where you can return easily.

Question 2

Will this tool fit a 2014 headlight on f150

Accepted Answer

To Richard,  I used it on my '05 F-150. It is the best tool for the job. My headlight has a 4mm allen type adjustment screw. Cranking toward the driver side,  clockwise when looking from the front of the vehicle. The only adjustment is the vertical adjustment by using the screw on the back top edge of the headlight assembly. You could do a visual or test the size with a cresent wrench. Cross reference with a 4mm socket at your local auto parts store. That is one way to figure it out. Another way would be to measure it. 4mm is less than 3/16".  Also you could check with a Ford dealer parts department. They could help with the verification of the size and location of the adjustment. As for the tool itself, I wish all headlight assemblies were adjusted the same, and with this tool. It took me three minutes.  Twenty five feet from a concrete wall at you local school, or supermarket. High beams even with the height of the center of the light will give you a wide clean crisp light. Good luck...

Question 3

Is this for ford only? Will it work for 2001 Tacoma headlamps

Accepted Answer

Worked just fine on my 2003 Toyota Tacoma prerunner

Question 4

Do you need this tool to replace headlights on a 2002 ford Taurus SE?

Accepted Answer

No I did not. I only had to pull the old set out and plug the new headlights in. They self adjust.

Manufacturer	Lisle
Brand	Lisle
Model	14540
Product Dimensions	35.56 x 4.32 x 1.02 cm; 130 g
Item model number	14540
Manufacturer part number	14540
OEM Part Number	14540
Position	Rear
Lift type	Mechanical
Item Weight	130 g

Lisle 14540 Headlight Adjusting Ratchet

Details

Description

Specifications

Common Questions