Gibson Gear PRPC-030 Neck Position Humbucker Cover, Nickel

I carefully measured the pickups to make sure I orderd the correct covers. I found through reviews like these that some Les Paul guitars have pickups with the same hole measurements on both the next and bridge pickups and others like mine have differenct measurements from the neck and bridge hole spacing.Purchasing Gibson Brand covers, I assumed getting a neck cover and a bridge cover would be correct and it was. For people with the pickups with same hole measurements, I believe you would order 2 neck covers so they fit correctly.Anyway, the measurements were perfect and installation was EZ (look for instructions on YouTube).Looks great and I can't hear any difference in the tone.

I was hesitant to buy these to put on my Epiphone Les Paul with uncovered pickups. I wasn't sure if the pole spacing would match up correctly because even though Epiphone is owned by Gibson, I figured they could go by different standards and the spacing could be different. When I got them, I sent them and my guitar to my local guitar shop. He was able to put them on with no problem. They're really good quality covers. If you've never personally installed covers yourself I'd reccomend sending it to a shop with a mechanic who knows what he's doing just so you don't screw anything up with the pickups because they can get expensive. Don't worry about these not fitting because THESE DO FIT EPIPHONE PICKUPS TOO. Overall a great quality product.

I ordered this to go on the neck pickup of a 2016 Gibson Les Paul 50's Tribute, with a 490 R pickup in the neck and a 498T in the bridge. I installed it on the neck 490R and it fit great. It will not fit the 498 T bridge pickup. You would need to order the Gibson Gear PRPC-035 bridge Position Humbucker cover. Not sure if you can see it on the picture or not.

I used 2 neck pickup covers on my les Paul trad pro v. They look very modern and I noticed minimal effect on the sound with nickel covers. If anything I liked this tighter sound more.

I ordered these pickups for my ESP LTD MH-100QMNT guitar. It is a solid basswood body quilted maple carved-top electric guitar, with dual stock ESP humbuckers. The nickel color looks great with the rest of my nickel hardware. The covers were easy to install; I simply loosened the poles on my pups, loosened my strings so I could fit the cover underneath the strings, popped it on over the poles, and tightened up the poles a bit. Sometimes I get a bit of feedback if I touch the metal plate of the cover, but that's because I didn't take any measures to prevent that sort of feedback. I also noticed that when I touch the metal plate of the cover and touch one of my tuning pegs with my other hand, the feedback is deadened completely and cannot be heard. I would imagine this has to do with some sort of grounding effect. These covers fit on fairly easily, and they don't seem to interfere with the sound, and they look absolutely fantastic.

i ended up putting these on all my Gibson's. es335, les paul, and flying v. the neck and bridge are slightly different so make sure you order the correct sizes. personally, i just stuck mine on and didn't wax or solder them. i'm usually just playing at garage level sound and i haven't had any issues. also i haven't had any issues with slippage [ they fit like a glove!!] i would only buy these for gibson american made guitars as other import humbuckers may be differently configured.

I had to give these a three because they don't fit the bridge pickup like it says on the package. Most Les Pauls use two PRPC-10s to cover both pickups. Before you order these check to make sure. They are built well and are an excellent product, For quality they deserve a "5", but since I had to open the package to try them out and the shipping to return it would have cost almost as much as the pickup itself it now resides in a parts drawer - I almost rated these a "2" because of that. More than likely they won't work on your guitar - hence a rating of "3".

For those of us who mistakenly polish the gold plated pickup covers on a really nice Gibson Custom Shop.These fit a Gibson Johnny A model perfectly, both neck and bridge.

No issues. Glad I purchased.

I ordered two of the nickel, neck position, humbucker covers for a pair of Seymour Duncan, Slash pickups on my 2013 Signature T (received it with those pickups in a trade). They were a genuine Gibson product and they fit perfectly. I'm totally pleased. When there was a slowdown in delivery due to pandemic postal operations I contacted the seller who responded almost immediately and refunded the extra shipping that I'd paid for quicker delivery. Seems like a fine company to do business with and I'd be happy to shop with them again.

...but it doesn't fit Gibson Classic '57 Plus at the bridge position. Neck spacing for both Classic '57 models.

Montati facilmente grazie ai tutorial di YouTube.Perfetti

These neck humbucker covers fit snugly on both pickups on my Les Paul Classic 2017T. Just had to remove all strings to be able to push the covers in all the way. Didn't need to solder or anything.