rabbitgoo Window Film Privacy Frosted Window Film Opaque Stickers for Glass Doors Frosting with New Grid Design No Glue Anti UV Self Adhesive Sun Block Home Bathroom Office 90 x 200 cm

I would have given it 4.5 stars but there wasn’t a half-only because it gives so much privacy that my bedroom permanently feels like there is snow outside with regards the light. It literally just filters the light-so no sunlight comes in at all and it feels weird. I may have to cut it back a little just so I can see some natural light. Really easy to put up just make sure you have a very sharp craft or Stanley knife else it could pull the film.

I bought this product in May 2022 and used it to cover the lower half of our living room windows - it's stayed up the whole time without any issue. The 'secret' to easy application is to use lots of spray water. The more water (with a little dish soap added) sprayed over the windown and side of film top be placed against the window, the better. You must use a sharp knife to cut the film! If it's dull, the film will snag. It's a good quality film and not thin, so a good cutting blade is essential.Update; a year later and the film is exactly as it was when I installed it. No curling or peeling at all.

Easy to install.Unable to get rid of bubbles.They keep coming back.Overall happy with my purchase.It does the job and looks nice.

Wanted this to create privacy on a front door window pane without blocking out excessive light.FUNCTIONALITY : This has added privacy to a front door. When applied to the front door the FROSTED WINDOW FILM was extremely effective in adding a frosted white background to a decorative door window. Looking inwards it is not possible to see inside the house during both daylight and night time hours even when the light is on insider the house and it is dark outside.INSTALLATION: Installation required some level of care and skill. This was due partly to the curved frame of the window but also to the nature of the installation process itself.Installation of this film requires similar attention to details as when adding a protective screen to a mobile phone.1) Separating the backing from the film is not easy. The suggested technique of using adhesive tape did not work. Eventually it was necessary to pick at the film backing with a pointed surgical blade trying to get the blade between the film and backing. This worked and I was able to start the separation.2) Applying the film to the wetted window is straight forward. Once on the window, partly because the frame is curved, cutting off the excess film required care. I found that even with a very sharp surgical blade the there was a tendency for the film to be dragged down the glass in the direction of the cut and/or if the film was held in place to stretch slightly under the cutting action of the blade. Neither of these issues caused a problem but care was needed to ensure a good cut. This may have been because of the curved frame.3) Smoothing out the water. This was easy and straight forward using a credit card type piece of plastic.DUST: The window was cleaned before applying the film with a window cleaner to remove grease etc and then washed down. However after applying the film I noticed two specs of dust under the film. This in my view id not a problem with the film. It is more to do with the inability to keep the local area free from airborne dust. It is the same issue as when applying protective covers to mobile phones. One reason this dust got under the film may have been because I only sprayed the window with water. I did not spray the film a with water as I have seen suggested. This may have prevented the film picking up dust due to static. However I believe that it should be easy to peel part of the film away from the window and then remove the dust particle as you would when fixing a phone screen protector. I Haven't done this as you are only able to see the dust from 5-10 centimetres away and then only of you peer carefully and intently.DUST UPDATE : The film has been on for a few days now and the dust specks that were visible immediately after installation seem to have disappeared. At least they are no longer visible. The only explanation I can come up with is that the film has molded itself around the dust and because it is frosted the small dust particles have been come invisible to the eye.GLASS TEMPERATURE/CRACKING: Some reviewers have reported windows cracking as a result of installing BLACK film. Cracking in sunlight has not happened to my windows. Out of interest I measured the the glass temperature of the window with the opaque/frosted film, a clear glass window, and a true frosted glass window all in direct sunlight on a sunny and very warm day.All windows were above ambient temperature. The clear glass window was about 5 degrees above ambient, the true frosted glass window was about 7 degrees above ambient, and the window with the film was about 5 degrees above ambient.This suggests that in my case the frosted film is not causing the window to heat up unusually when compared with other glass windows. However, I can appreciate that a solid black film, because black absorbs heat, may cause the window to heat up more. For interest the ambient temperature at the time of the measurements was recorded on the device used to measure the temperature of the windows as around 30C.

There is nothing to dislike about this product as it does what it says it does.Just follow the instructions and it works so well. I used a mixture of fairy liquid and water to help mine stick to the window and a cloth to put it up. Then to remove the excess water and air bubbles very easily, used a window wipe "squeegee" to do that which works very well. Will see how it works over time but it sticks well.

Not very sticky, too many bubbles forming everywhere, the corners are the first to peel off. Overall, wouldn’t buy it again

Was afraid this would be like cheaper products I've used in the past but this worked exactly as needed, lets you cut it to size pretty easily but I'd recommend having a second pair of hands as it makes the process even easier. As long as you get the bubbles out as you go and even use a low temp heat gun to get the smaller ones out as you flush it to the window. Good product.

WOULD RECOMMEND Bit fiddly to apply - have lots of small bubbles but on a lean to roof so don’t overly see. Very effective for price - will be interesting to see how it copes with cold/ condensation. Slight falling/ peeling away from edge. Very difficult to trim as suggested when up so I cut to exact size from get go for second window.*** I only bought one roll initially as wasn’t sure if it would work - it does - so ordered further rolls - unfortunately they are slightly different colours (one more cream than white) which is noticeable when up. Still good value and instantly effective on stopping neighbours upstairs from over looking into my house** Recommend - definitely for the price!