ENEACRO 1-1/4 Inch SDS-Plus 13 Amp Heavy Duty Rotary Hammer Drill | Safety Clutch, 4 Functions, Vibration Control, Includes Grease, Chisels & Drill Bits, With Case

Superior quality exceptionally heavy duty and functioning hammer drill. Versatile and easy to use with multiple bits.Included.

Edit [11/4/19]: Stiill going great! Used the 3" chisel to remove an old mortar shower pan and wall surround done in ugly old tile. Then, after cutting large rectangular openings in the slab underneath to get at the old cast iron drains needing replacement, used the Eneacro with narrow bits to break the concrete into manageable sized pieces. SO glad I bought this! Unfortunately, I'm now out of grease, and although the hammer is still working, no one from Eneacro has yet responded to my question of what grease to use! Hellooo!I bought this just over a month ago, and the hammer function just stopped working. I was prepared to be upset, but then I thought even though I haven't used it as many hours as they said before it would require adding grease, I would try doing that. I squeezed a little more than half the tube provided into the hole on the top (nice of them to include the grease and the tool to remove the cap). Then I ran the drill without attempting to hammer or drill anything for about thirty seconds. When I tried hammering again, the chisel just vibrated slightly, but within a few seconds, the old sound of the powerful hammer came back and the chisel went to work again!I know the company has someone read these reviews, so I hope they will respond with information about what grease to use when I run out, which I will be doing sooner than I thought. I am so relieved that the lack of grease was why the hammer stopped working, because I have done so much with this tool in the month I've had it.First, I used it to drill holes in CMU's (cinder block) to anchor furring strips with Tapcon screws (2x3's on edge to accommodate 2" polyisocyanurate insulation board). I bought a Bosch 3/16" SDS-Plus bit to pilot the screws. SO much faster than my 18-year-old Makita hammer drill that had begun to scream at me.Then, I used it to chip off some uneven concrete. I had to be careful, because it wanted to take away more material than I needed to get rid of. I ordered a 3"x10" straight chisel from another manufacturer so that I could take up glued down linoleum flooring quickly. I haven't done that job yet, but I also knew the wider blade would provide more control in chipping away high spots in concrete.After that, I used the rotary hammer to put multiple 3/16" pilot holes for Tapcon screws to anchor pressure treated floor plates over 30-year-old concrete. This was the kind of task that had likely killed my hammer drill over the years as well as taking a huge amount of time to drill each hole. Thus, this was the true test of the rotary hammer that I bought to replace the Makita. What a dream! The ENEACRO had each hole to full depth almost instantly, and since it was so fast, the bit didn't get hot the way the bits in the Makita had. So these bits should last much longer because they stay relatively cool.Next, I used that new chisel to make digging a trench though hardened dirt and sandstone rocks to lay a drain pipe to carry water away from my foundation. Wow! Made the job much easier than it had been using a shovel and gave me far more control than a pick would have provided in breaking up the soil just where I wanted the trench. A narrower chisel would have just buried itself and I would have spent all my time pulling the chisel back out of the hole, but this one was perfect. Any wider chisel in this soil, and I would have been better off with a full-sized SDS-Max demolition hammer, which was good, because I couldn't find a wider chisel in SDS-Plus.After that, I used both the narrow chisel that came with the rotary hammer and the 3" one I bought separately to break up 5 1/2 CMU's that had been solid grouted with concrete, rather than ordinary mortar. Several had rebar set into them, so I also used my 12" diamond blade concrete saw. The hammer allowed me to trim the CMU away from the poured concrete that was placed behind the blocks without gouging it, which was my goal. The saw only cuts about 4" deep, and I needed to go 8", so the chisel was indispensable. It was at the end of this job that the hammer function stopped working as well as it had, and I thought it was maybe just that the machine was hot. The fix was as described in my first paragraph above.Most recently, I made a 4" round hole in ungrouted CMU to run a dryer vent through the wall. The smaller chisel did an almost perfect job of it, so I only had a tiny bit of hand chiseling to make the hole fit the 4" duct almost perfectly, with very little room for caulk! I haven't done the outside hole yet (It's raining out there!), just put a small hole in the center of where the 4" hole needs to be from the inside, making it easy to locate the hole on the outside when it stops raining.If you have suffered from the inadequacies of even a heavy-duty hammer drill for years, as I have, do yourself a big favor and step up to the ENEACRO rotary hammer. It's a terrific bargain in a powerful tool!

Good product, works great

Good performance. Excellent value

Like drilling into like Butter. Smooth operation. Im a DIYer, I like doing my own stuff because I do an excellent job. I wish I had more holes in cement to drill. I used a Milwaukee bit because the size i needed. It has plenty of power. No more drilling with a regular power drill, this thing is excellent.

Built Like a Tank and Ready for AnythingThis ENEACRO rotary hammer drill impressed me right out of the case. The build is solid, with a rugged body that feels ready for years of heavy use. At 13 amps, it’s got more than enough power to chew through concrete, brick, and stone. I’ve already used it to drill anchor holes in a foundation wall and to chip away old tile—both jobs it handled with ease. The included drill bits and chisels aren’t top-tier pro grade, but they’re perfectly serviceable to get you started, and the grease is a thoughtful addition for maintenance.I like the four modes—drill, hammer drill, chisel, and chisel adjust. Switching between them is smooth and intuitive, and the vibration control works better than expected. After an afternoon of use, my arms weren’t nearly as fatigued as with some older hammer drills I’ve owned. The safety clutch is another great feature that gives peace of mind if the bit binds.Things to keep in mind: this tool is heavy, so it’s not something you want for overhead drilling or all-day use unless you’re ready for a workout. Also, while the included case keeps everything together, it’s more functional than durable—I wouldn’t expect it to withstand jobsite abuse for long.Bottom line: This is a powerful, well-designed rotary hammer that delivers professional-level performance at a very reasonable price. If you need a tough drill for concrete, masonry, or demolition tasks, this one is a fantastic buy.

I bought it to drill granite for splitting, the hammer is very effective I have drilled and split many stones, i am Very happy with the purchase

Great product. Worked very good getting through concrete and fast.

Je ne connaissais pas cette marque, mais elle m’a vraiment impressionné. Pour le prix, c’est une machine très efficace. Je ne sais pas si elle tiendrait le coup pour un usage intensif 40 h/semaine, mais pour un usage sporadique, elle vaut largement l’investissement. J’avais l’habitude d’en louer une à 70 $ pour 4 heures — celle-ci m’a permis de casser une dalle de béton de 3", de poser une trentaine d’ancrages 5/8 x 4", et de percer des trous de 1 1/2" dans 10" de béton sans ralentir. Très puissante. Elle fait maintenant partie de mon arsenal, pour le prix de trois locations.

Actualizado 20 Nov. Recién hice una demolición con este martillo y funciona perfecto! Se llevó el concreto de 30 años y la piedra sin problema, eso si con el trabajo y el sol, se calienta bastante, lo dejo descansar 30 mins. X cada 50-60 de trabajo. Pasé mucho tiempo queriendo comprar un taladro demoledor pero no tenia necesidad realmente y las opciones de Bosch y Dewalt muy caras, y con un piso que necesita demolerse en puerta decidí probar este taladro, y apenas tuve oportunidad de probarlo, de momento puedo decir que es bastante bueno, perfora concreto sin ningún problema, algo que noté es que el polvo que genera es más fino y el ventilador del taladro parece huracán, por esto mismo vuela mucho más polvo, así es que es importante la protección ocular y respirador. Muy buen producto, llegó completo, rápido y sin queja de mi parte.

After years of drilling concrete with simple rotating masonry bits, I decided to purchase a hammer drill do a multi-hole project. I purchased the more powerful of the two available from this manufacturer, and didn't regret it. Where simple rotating masonry bits work out quickly and just spun without penetration once hard spots (rocks presumably) were encountered, this hammer drill just pressed through without any hesitation ... seriously like a hot knife through butter. I ensured that I used the correct drill bit type (specified in the description), and lubricated the fixture end also as indicated. This made the bit remove easily - I did note that the grease had thinned and gained transparency during the drilling, so it must have been under load/heat. It was easily wiped off so the bit could be stored for another use.I had read a review citing that these bits jammed in this hammer drill, and was worried about it. The method and importance of greasing the bits prior to use is described in the manual. Other key short and longer term maintenance items were also described - blowing out concreted dust from the motor vents with a compressed air duster, and replacing the internal mechanism grease.The manual also specifically warns this not an industrial or commercial use product, and it seems very well built for a home-only use product - particularly as it is a small fraction of the cost of more recognized name brand products.

una de las mejores herramientas q he usado, estaba dudoso por la marca, yo usaba un rotomartillo málita de 7 joules, desafortunadamente x los anos de uso se quebró.pero al usar el este rotomartillo Eneacro de 13am vaya sorpresa, golpea igual de fuerte que el makita, estoy contento con mi compra, y en general la calidad de la herramienta se ve y se siente muy solida, no duden en comprarlo, luego pondré fotos

Muy completo bien precio