EZDIY-FAB 120mm Blue LED Fan, Dual-Frame LED Case Fan for PC Cases, High Airflow Quiet,CPU Coolers, and Radiators,3-Pin-3-Pack

Fans have anti-vibration rubber isolators on all four corners on both sides. Wires are about 10" long has 3pin fan connectors and a molex connectors. I used 6 of these fans in an antec case pairing up two fans via molex then hooking them to the motherboard with the 3pin connector. Since they aren't pwm fans the brightness of the led rings corresponds directly with the fan speed. When my system is at low temps the rings glow dimly and get brighter as temps increase. I love this easily visible temperature indication. I highly recommend these fans but if you want pwm make sure you get the ones with 4 pin connectors!

Nice that the fans come with cushions on both side. How ever that made it a little too thick and the screws could not latch onto my radiator. After removing 1 side it worked fine.The size was a little off cause I had to apply pressure when mounting onto my radiator to fit. The frame had bent a little but enough where it wasnt scraping on the fan blades.Been monitoring the temp more closely for the past 2 months, so technically in less than 3 months already the fan isnt working properly. The fans arent pushing air at all practically, without changing any settings. They are just spinning but not moving any air flow. Was able to touch the exhaust fan and its motor was very hot, so I also assume that is contributing to my temperature rise. My radiator for my closed loop cooler was pretty warm too. on average my computer is now roughly 10 degrees warmer than my normal temp. Running only Youtube even with my old fans my computer was at 32 degrees now in 30 minutes my core temps range from 42 and spikes to 56 degrees.It's really hard now to try to save a dollar.

I was a little hesitant to purchase these at first because they were not a brand I was familiar with, but man am I glad I did. They have a thick rubber like outer edge that is dense and masked them feel like they are of higher quality.The screws were a little harder to screw in than I've experienced in the past. They also didn't want to always thread level, but they are holding tight.In addition that thick rubber edge may create a problem if you are placing multiple fans close to each other, like I had the in the front of my case. They were rubbing preventing them from being installed in the internet holes. That didn't stop me, but you may want to be aware of it if you have a smaller case.Color is vibrant and beautiful!

The 3-pin blue fans do not light up at all when connected to motherboard fan header. You have to use the 12V molex connector to get them to light up. At that speed they are annoyingly loud.

I bought two, three packs of these fans for some custom builds my daughters and I were doing. All six worked and feel like they're made out of high-quality materials. They're whisper silent and the RGB looks great.If you only use the three pin from the motherboard the fans will glow red. If you want full RGB you have to use the four prong power from your power supply.I would recommend these to anyone. They're a great value!!!

Very well made, and easy to install (dual option-small three pin or larger four pin molex)- Good cable length, too.Blades don't lightup, but rings around the sides glow nicely.Only needed two, but decided to use all three in my aging Zalman Z9 case.Quite pleased, especially the value.Hoping they have longevity, and durability in horizontal exhaust position, at top of case, which is a problem for some sleeve bearing/cheap fans.

It's cheap, all 6 fans are working and seemed a good product.It should be a 5 stars but one box is missing the mounting screws for 3 fans. Luckily I was replacing the old which i can re use the screws.Wish the power cable is a bit longer so i can place it more inconspicuously.Missing small parts is a big deal in projects and making the unit to work properly.**************************UPDATE: changed to 4 stars from 1 since the seller is willing to send the screws but i no longer need. It's frustrating to find if a component is missing. It would not cost more if you add extra screws as well. Its a good product but it fails when small things like mounting screws are missing.

To any experienced PC builder; you will notice, when you hold one in your hand, the weight of this fan and how extremely well made it is... Super Quiet! The LED's are nice and bright, the exact same brightness & color as the AMD LED Spire fan. I'm putting these in all my builds from now on. Three for $15.00 is a steal!.

Really!Ok these fans look great, and are fairly! quiet and, good air flow.So whats wrong with them. Well you buy them for the LED part also, only that does not barely light up until the fan is at 40%. 50% to really be of any use. And this is where they start to get noisy.Full full effect you need to run them at around 60 - 70% speed, and that is noisy.My PWM runs all 3 at 10% ish. So makes them completely pointless as you cant see the Led rings at all.Whoever designed this needs shooting, totally ridiculous and pointless.My other fans lit up full brightness and the system controls the speed.FAIL! DO NOT BUY, WILL BE RETURNING.

was impressed with build quality.....put the system together only for one of the fans to not work.......other than that.....nice :-(....(updated)...but was sent a new one in the post by the company......am well pleased....thank you

Got these fans because I needed 9 and these are cheap, turns out very good quality I'm very happy with them, as you can see it's a good amount of true white light output and I honestly can't say the fans are loud, I have 9 and I can hardly hear them!

Turn purple at power on then the LEDs switch off and that's it. No LED light. Spend a little more money and buy something decent. Buy cheap - buy twice. I now have corsair LED fans that work as expected. Utter rubbish. Be warned.

Create cool air which is what they are for. Very noisy though