Garrett Pro-Pointer AT Waterproof Metal Detector - Made in The USA - 20ft Submersible, Orange Visibility, High Sensitivity for Nuggets & Small Targets, 3 Levels, Quick Button Adjustment

It's way better then the older one and it came on time and had no problem with this person selling me it . And more important is that it's the real deal not a fake !! The only thing u have to get use to from the older one is the on and off button when u shut it off . Turning it on is the same press button and u have it up and running now shut it off hold the button for 2 seconds I'll say just about two seconds. that is what u have to get use too other then that it's much much more better I'll say one of they best pinpointer out there the turning off switch u will get use too it I have the older one and when u use the old one and then after u use the new one u just have to rember too hold for two seconds to turn off that was my only thing that I had to learn and the settings are very easy u will learn it on the field in a full day or two .. And once u use this and u go back to the old one u will never want to use the old one cause it's way way more out dated to this one trust me and the old one has that fault reading and I took mine apart and re did the wires with srink tube and it's better but some times I had to touch the ground with it and turn it on to make it work better .. The new one turn it on and go to town with it no faulty hits and what I love about it is if u don't want pepole next to u no what u are doing is shut off the volume and leave it on vibrate only and u have a extry setting where u gain a extry inch or a less inch or so from the old one and I love the part where it is water proof and the color I love too ... My old one I used it right out of the box and I used it for two years and I saw the plastic tip whereing off from sand what I did that I would tell anyone that will buy one and wants it to last many years that I haven't seen any one do or on Youtube is go to homedepoit near u and go to where they sale shrink tube for car battery and u will see that thay sale heavy duty shrink tube for wires underground or under water it's not your every day shrink tube it's a very think shrink tube and it's the perfect size to slide on too and then u get a heat gun and shrink it take your time do heat it up that u want to met it what I did was take the battery out and got a rag and wet it down so when I was done I put the rag on the tip of the pinpointer to cool it down and I took like a butter knife and use the back end of it and press on the scrapping blade of the pinpointer as I heat it up to make the shrink tube go nice and tight on it without so much heat to it and I left about one inch of the shrink tube sticking out the end of it and I had mine go right up next to the led light and this shrink tube once it's heated to shrink on to the pinpointer it get very very hard shrink tube I mean I've Ben using this shrink tube on my pinpointer and man this thing is like plastic hard shrink tube I mean strong strong and now my pinpointer won't get all scratch up or worn out on the tip ! But ya I picked up that shrink tube at homedepoit and it's called heavy duty shrink tube for wires that are under ground heavy duty thick wire that two off the wire are meeting up together and u shrink this on too it it's about 6 inches long and about a quarter size hole and it cost something like 4 or 5 bucks but it is the best shink tube that I ever seen and I Ben working with cars for 18 years painting cars for 18 years and back in the days I use to do car stereo all the wires thick wires with powerfull amps I mean I have a s4 audi and I crack my front windshield twice from the base .. I use shrink tube plenty of it but this shrink tube is very strong and thicker and it won't slide of or wear off . I hope this Long ass review help anyone I would for shore buy the new pinpointer and shrink tube and it will last a while as long as u take care if it and don't use to pry rocks with it !!

Definitely works great. Definitely worth buying. And also would make a great gift.

This is a great pinpointer. Locates items quickly and easily. The different setting for sensitivity are a big help in knowing just how close you are to your target. Easy and fast to set and switch between modes once you play around it. I've located a whole pilet of coins and other items a lot faster. Rugged and well built. The little built in flashlight is a good help when spotting a target in a hole. The scraper comes in handy to swipe away a little dirt at a time. I like to use it on high sensitivity at first to get on target. Picks up a target real good and pretty deep. Then after cutting out a whole I switch straight to low. Because on low you have to be within an inch or almost touching a coin before it sounds and vibrates. Really easy to pinpoint small objects. I've had it soak and wet and under water and it performs great. The vibration modes are a huge plus underwater. Battery is easy to change and lasts a good while. Although I never go out anywhere without back up batteries. And nobody should. The holster is really convenient and will attach & detach from your belt without taking your belt loose. Has a snap right on the belt loop. The only minor inconvenience we've had is that you can't use 2 of them in close proximity or they both go haywire like you've hit the mother lode. But when you're that close to each other it's not a hassle at all to just turn one off and share a few moments. I was also able to register my warranty online in just a couple minutes. Don't settle for a cheap pinpointer. This is the one want you. And the one you should buy. I'm very pleased with its performance and I'd recommend it highly. It's a great product.

Great pin pointer.

Very well made and it works great. Don't have to worry if it gets wet or muddy!

I use this mostly to check my gravel pile when screening my placer material. It won’t detect small nuggets, but it will detect anything that doesn’t go through my screens. I used it in my aqua regia process the other day after I precipitated my gold and it sounded off which surprised me. I did it in the glass first then dried it out. It wasn’t as quick to make noise, but it did. I have found small pieces of metal in the creeks with this. I have used it under water sniping. It picks up quicksilver and amalgams very well. I bought a tip for it. I take that off and clean it out every once in a while. I’ve had it for about 6 months with the original battery. I like that. Keep a back up 9v just in case. I did use it to find studs in my house by finding the nails the other day. And dropping a screw in the sand was easy to find with this. Would I buy this again? Maybe, for what I’m doing there is better out there, but for now this is good enough and the price was reasonable. I wish it was sensitive enough to find smaller gold. But it is not. Four stars firm.

I always like to use matched equipment for some reason. I recently picked up a new Garrett as I had sold all my former Whites Electronics gear. This pinpointer is much better to operate than my old ones. The technology has changed so much. I bought a second one from a third party company for 1/3 the price of this one and it works every bit as good. But I gotta keep this one because it says Garrett. Lol

Works wonderful. Was easyto operate

Excellent Product

Perfecto!! Cumple con su función.

After watching countless metal detecting youtube videos and boring my girlfriend senseless, I decided to buy the GARRETT CARROT. Well let me tell you. The thing is extremely sensitive, and easy to use. Itll pick up my fridge and sink from almost 2 feet away as you can see in the video. (Ignore the big bug in the sink) now that being said in the field it's amazing too. Itll pick up a coin from 4 inches away, however if the coin is on its side it's more like an inch as the profile is very thin. If you metal detect and hope to find TREASURE you probably still wont, BUT you will definitely find more nails, rusty bits, bottle caps, and pop tabs. You will pinpoint things extremely accurately and easily. I have a bounty hubter pinpointer and it wouldnt pick up a 1 ton slab of steel if you stabbed it into it... this garrett would pick the thing up from the international space station. GARRETT you've done it again. I added this to my AT Pro, and now I'm finding all kinds of useless rusty tetnis infested metal bits :) Guys... this is a fantastic buy, if you metal detect you need to buy this thing.

Great product quick and easy delivery. Very happy with purchase

Si vous êtes prêts à acheter un détecteur de métaux, n'hésitez pas à vous munir de cet accessoire qui vous permettra de savoir si la pelletée que vous venez de retourner contient l'objet détecté ou si vous devez continuer à creuser. Il permet une détection rapide et précise dans vos séances de fouille sans devoir plonger la main dans la terre. Je recommande vivement.