Non-Ticking Hands Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement with 3 Different Pairs of Hands (1/4 Inch Shaft Length)

No noise and easy to install! Highly recommend.

I used this to replace a wall clock motor that was running too fast. It was very easy to install, the whole process took less than 5 min. It is nice to have three sets of hands so you have the right length to fit the face of your clock. The silent second hand (no ticking) is a nice feature. After three days it’s still keeping perfect time. Be sure to measure the shaft length needed so you get a Goldilocks fit (not too long, not too short, but just right). I would definitely buy this product again if needed, but expect this to keep on working flawlessly for a long time.

Bought 3 of these. One quit working after several months. Other 2 are good.

I had a clock for about 20 years, and the mechanism gave out two years ago. I had trouble locating a clock mechanism with the right dimensions-- shaft length and the threaded shaft- Measure carefully. This fit perfectly and over 24 hours keeps time perfectly with my good Seiko Quartz watch. Battery was very snug to get into place, but it goes in and stays in, which is a good thing for a wall clock. The minute hand was just a bit long, but I trimmed 1/2 inch off the tip with scissors. Very easy. I did not want a second hand, so I left it off-- at my age I can't do anything in seconds.

The clock movement and hands arrived packaged undamaged. Installation is not intuitive, but I was able to do it after studying the parts.

I have an 25+ year old skill craft (Light house for the Blind) clock with a Navy Logo that I am fond off. It sat on the wall for a few years as broken clock. I chanced into this repair kit by luck and gave it a shot. Not only was this easy to replace, but it fit right in and had parts similar to the old broken parts. In less than a 30 minuets I had the clock functional and back in working order.I mean EASY, like a handy 5 year with a blind fold could probably use it to repair a clock. It looks good, looks classy and has a surprising good quality for the price.

I have purchased and installed these quartz clockworks in clocks I made and clocks I repaired for over 40 years. I have quartz clockworks in clocks in my house that are over 40 years old that work fine. I bought those clockworks from Klockit and they were manufactured in America at that time. This one I bought at Amazon worked until just outside of the return period. Then, it would stop and start; losing time on a regular basis. I began checking the alkaline battery for power but no problem was noted. I replaced the battery with a new one. No improvement. This week the movement just stopped working altogether before it was 4 months old. I am very disappointed and give my strongest recommendation to others to not buy this unit..

Great replacement kit to reduce a broken clock. Parts go together without stress. You get 2 different types of arms and a great motor that you don’t hear and keeps good time.

Used to replace mechanism in favorite clock at the cabin.

Para reparar un reloj antiguo

Great unit works perfectly

Bien emballé et tres silencieux. Reste a voir si lheure vas etre bonne .

Movement device is not working properly. It’s malfunctioning , going backwards.