MPA2019 3D Printer Adhesive Glue for Nylon Filaments - Long-Lasting and Reduces Warping on Flex Plate, Glass, PEI, Buildtak & Kapton - 3D Printing Accessories, Supplies, and Materials (50mL)

Stuff is a life saver and for what little it costs compared to a failed 6 hour print it is value for the money. To put it on you just apply in the area you want putting lines down vertically then horizontally, that's it easy stuff. It keeps the materials firm to the base even with a less perfect level so it is plenty sticky. To clean the stuff just run it under some water and take a towel to it.

Works perfectly with PA filament. Arrived ahead of schedule.

This is my go to glue for printing PA6, PA12 and such. This always helps with bed adhesion as well as release. Since using this glue I have zero issues, I've previously destroyed a build plate with a different product, but this glue is amazing and makes printing with PA6, PA12 and other higher end material a breeze.

If you are looking for some sort of adhesive then you already have some level of frustration. Buy this stuff and pretty gets simpler. You still need to have a tuned printer but I was struggling with moving from prints with a brim to print in place articulated models. The articulated models kept detaching from my glass bed. I print with a glass bed heated to 50 - 60 degrees. Note....very important. Do not try and remove the models immediately after printing. They will be STUCK to the glass and initially I questioned if this was helping me...yes it sticks but I have to use a pry bar (screwdriver) to remove the prints. On my next print I let it completely cool to 22 degrees and the print was just sitting loose on the bed. I looked at it and it popped loose. The chemist who formulated this stuff is a genius. I'm using it on a glass bed with PLA.

I used this with 3dXTech's CarbonX Pa6 Carbon Fiber Nylon. All of my larger prints warp and lift right off the build plate when using this bed adhesive. I have an enclosed Ender 5 Plus with a Bondtech DDX and Mosquito hot end for reference. I used Elmer's glue stick on the same exact gcode and the part did not warp off the build plate like it did with the Magigoo.Disapointed that I wasted probably 30 dollars worth of filament trying over and over to get this to work with different settings. Waste of time. Stick with what works.Can't recommend this stuff to anyone. I'll probably return it if I can.

This just makes the print so much better! Printing with pa6cf20, used to failed at third layer and now I can print a full print bed

adhesive works well suggested for use on darkmoon build plate, doesnt not completly com off after use. cost a little more from amazon byt delivered quick

This is for the Nylon glue. It is fantastic! I had previously tried every possible solution, the best out of them being a G10 sheet, however it still was not working 100% perfectly, still was having issues with large parts, or parts with sharp corners, or parts with greater infill. With this glue on a standard textured PEI sheet, the nylons stick extremely well! For any size of prints I have tried, and for those that I was not able to print with any other method. Even after cooling down the prints are attached firmly to the surface! I am very happy with this product!

Hallo zusammen, also von mir bekommt der Stift glatte 5 Sterne. Ich hatte mir Nylon/Kohlefaser Filament gekauft und sehr grosse Probleme gehabt, den Druck vernünftig auf das Bed zu bekommen. Ich habe wirklich sehr lange mit den Parameter in der Software probiert, es wollte aber partout nicht klappen. Daraufhin habe ich mir den Stift hier bei Amazon bestellt. Was soll ich sagen...es hat sofort geklappt.! Die erste Schicht hielt und ich könnte bis zum Schluss drucken. Das lösen von dem Objekt klappt anschließend auch sehr gut. Was soll ich sagen, ja es gibt vielleicht andere Möglichkeiten aber für mich ist es einfach sehr bequem und zuverlässig. Und ja er ist etwas teuer aber man muss auch dazu sagen das er sehr ergiebig ist. Für jemanden wie mich, der nur gelegentlich mit diesen Filament arbeitet, wird er lange halten. Da bin ich mir sicher ;-) LG

Ive got a couple of reels of esun ePA-CF. Its quite nice filament but it warps like anything. Its an absolute sod, peeling up after a couple of layers (60deg heated chamber, 100deg bed, brims, Hilbert first layer, slowed right down - tried everything)This stuff is expensive but it just works. No more warping, no more huge brims (depending on geometry). Very impressed with it so far.

Con esto te aseguras de que no se te despegue nada, incluso aunque haya un huracán. Estoy muy contento con el resultado. He impreso materiales técnicos, como nylon con fibra de vidrio, y ha funcionado perfectamente.

I tested the Magigoo Pro PA against my existing 3DPrima PrimaFIX glue for Sirayatech PPA and PPA-CF Core filaments and Sunlu PA6-GF25 on a Bambu Lab P2s Engineering plate heated to 100C and a build chamber temperature of 55 at the start of printing, rising to 63-65C. I did not test any other build plate temperatures. Comparing the consistency, the Magigoo Pro PA has a lower viscosity and is clearer when applied, leaving no bubbles, while the PrimaFIX is milky to begin with and leaves a few bubbles but these disappear and the film turns completely transparent once heated up on the bed. Both wash off completely with washing up liquid and hot water. The PrimaFIX provided significantly greater adhesion for all filaments even after 4-5 prints without reapplication. This could be a good thing or a bad thing. If your parts are prone to warping and require very strong adhesion, go with PrimaFIX. If you want to be able to easily remove the parts, and potentially minimise wear on your build plate surface, go with Magigoo Pro PA. I myself will continue using PrimaFIX, which is less than half the price.

fait parfaitement le job pour du PA, j'achèterais la version ABS par la suite pour comparer.