Genuine Mazda (0000-91-42B) Touch-Up Paint - .44 fl. oz.

Matches the color perfectly as the Fiat was built by Mazda. The only issue with this "pen" system is for some small nicks and scratches, I find the paint comes out too thick so it can't really target a thin and shallow scratch and keep very even with the surface. On some bad, deep paint damage it worked wonders and I could barely tell that the paint was damaged down to the metal surface, but on the shallow and thinner scratches, I couldn't get quite as good of an application - and when I tried smoothing it out it just smears over the unscratched area. Maybe I'm just bad at applying it. The product does a fine job otherwise.

good on delivery

I had a few small chips of paint removed from around my car’s headlight. This paint is very translucent. It took about 5 coats to completely cover so that nothing was showing through. Therefore, the paint was bumpy. But at that time and for a few days later the color matched pretty well. So, I was moderately satisfied with it. But after about a week I noticed that the paint darkened to a tannish color. It’s supposed to be pearl white. This was completely unacceptable. Fortunately, I was able to remove the touch ups with some thinner without harming the car’s original paint. It is now being professionally repainted at the dealer. This touch up paint was a complete waste of time and money.

It doesn't look 100% like the original color, but it's not bad; it works for covering small details.

What I like most is that the color match is very good. What I don't like is that there was no mention of the fact that you have to shake the canister for at least five minutes. I did it for 10 minutes to be on the safe side and it finally matched after a year of the touch up paint sitting in a drawer because I thought I'd purchased the wrong one. For very small stone chips (I live in Colorado and have commuted 60 miles a day for more than four years), it works great. For longer scratches, you'll have to do your best.

It isn’t perfect; however, at the end of the day it is a paint pen. Looks a heck of alot better than the rock gouge that was in my hood. I dabbed the paint pen in a scrap piece of plastic first and then used on my hood.1st pic is up close to show repair. Next pic is normal distance away. I included another edited version of the second picture to show identify repair area. Hope this helps.

After reading a couple of reviews I wasn't sure about this product for my 2018 "Jet Black" Mazda3. However I ended up purchasing and applying it to my car back in August of 2019. To date (over a year later) it looks as good as the photos posted. I'm pleased with the color match and simplicity of use. The only real issue is if you look closely at the area I patched there's a slight depression. This could be completely my fault (not enough paint) as it was my first time touching up paint. Not sure about other colors, but for Jet Black it's a solid purchase.

Take your time using very small dots of touch up paint and you can get good results. The very fine tip on the paint pen allows you to do this. Squeeze too hard, though and you’ll be wiping off the “snot nose “ globs and starting again. This isn’t a brush-style applicator, so don’t think in terms of smoothing out the applied paint. Instead let the small dots fill in the chipped area. This can take three or four layers to accomplish, so allow each layer to dry and then apply lightly again.

اللون غير رقم اللون الظاهر في الموقع

لا انصح به

good not bad