Alinsea Screen Protector Compatible for Samsung Galaxy Note 10 Plus/Note10+/5G Tempered Glass [Fingerprint Sensor Compatible] [Full Adhesive] [3D Glass] [Case Friendly]

The media could not be loaded.  The screen protector is OK however it has some problems. To start with I installed this screen protector on my note 10 plus and that went believe well there were no issues with the The glass or the kit and cleaning the phone with the screen cleaners was easy. You have to put on the covers around the buttons and the end of the phone. Then with the covers on the end of the phone you put a blob of glue in the centre, Glue is a UV curing glue so you use a UV light to cure it but you must keep it away from sunlight or it ll start to go hard by itself. So once a screen is positioned above the actual phone screen you pull a little tab out the screen drops onto phone and youYou wait for the adhesive to spread out.Once the adhesive has spread out you can then use the UV curing light which is USB C to cure the adhesive. I had no problems with this and I gave the phone a good clean Before & After so there was no dust under the screen and the deceive was easy to clear off around the phone.So this side all good.The issues 1st the screen is slightly opaque this means that the screen has a slight colouring or like like sunglasses but it's misty very slightly though this is not normally a problem when you're using the phone it doesn't distract you at all however it does affect the camera on the front of the phone so if you take a picture with light behind you the image is slightly hazy. This is because the screen protector goes over the camera there are no cut out for the camera on the front so the camera has to see through the glue and screen protector. This is where the haziness is an issue. With this screen protector the phone is now telling me to clean my lens regularly. Previous brand had a cut out so it did not have to see through the screen protector and did not have this issue. That said this new screen protector looks better because there are no cut outs, so it depends on what you like. That was a deal breaker for me everything else looks OK.The 2nd issue is a minor one but you might not worry about this if you look very very closely you can see very small pimples on the glass between the glass and the foam screen and looks like a slight grid array maybe every 2 milimeters.. But to be honest you can't really see this.I had no problems with using the screen protector and a case.I can't say Hi well the Glue will stay as I've only just put it on.At The moment it looks fine. Yeah the reason I'm using this Glass glued screen protector is I find they tend to be better than the plastic ones however this glass Spring protector does not seem to be as good equality as the previous brand that I was using unfortunately I was no longer able to get that brand. This screen protector is very much cheaper and seems to be OK for the price but it is not the same quality that I would expect especially around the camera. You get some basic tools to guide you and install screen protector and the UV light stick works well enough however it's very small.Therefore I am giving this 3 stars as it does work but for me it's not perfect. And that is primarily driven by the camera having a hazy image.

Overall a good screen protector however it is quite difficult to install as the glue doesn't really spread all over the screen and the sides have easily cracked as soon as I installed it. On the other hand, the fingerprint works perfectly.

I'm always sceptical of fake reviews for things like this on amazon, its very apparent which ones are fake and really puts me off buying a product. I read a few reviews here, they seemed mostly positive but I'm pretty sure a lot of the reviews are fake.I was pleasantly surprised by the screen protector though! The installation kit they give you is quite sophisticated, amazing really for £13. Really do watch the video first as its very easy to screw it up. Only criticism of the installation is despite all the protective stickers, it is quite easy to get a bit of glue on the power buttons. I was lucky and managed to swiftly wipe it off before it stuck, but I can image you could really screw things up if you're not careful.The actual protector is good quality, feels smooth and strong, fingerprint scanner works well with it, haven't had any issues with that. It has reduced the screen sensitivity by a very small amount (its barely noticeable but occasionally it doesn't register some faint inputs). However if you have a Samsung Galaxy Note 10, there's an option in the settings to increase the screen sensitivity in the settings for screen protectors. Once this was turned on I had absolutely no issues.All in all I'd say its a good buy for the price, installation is very fiddly, but if you get it right it fits very well and has well surplus room for cases.

SAMSUNG NOTE 10 PLUSIt is good really very clear, the thing i appreciate is the finger print sensor remain effective, even there is no hole in the protecter.The protector which i got was not in " level" three edges were touching the screen but fourth one remains above.The size is good enough to cover almost whole screen.Bad thing there is only one glass protector in the box.You can not find particularly for NOTE 10 PLUS,Apply screen protector in DAY LIGHT with screen off otherwise there are possibilities to not fit front camera holes.on YouTube instructive film is about NOTE 9.

It fits reasonably well. There is a gap all round the phone which makes it usable with the Samsung LED case. But there is a issue with the glue as for the Note 10 plus there was no insert, as for the more expensive versions, that protects the glue from entering the upper loudspeaker. Luckily I made made own which worked ok, if not it would have mucked up the speaker. This is the first time I have ever used a screen protector with glue and boy it goes everywhere. It took quite a while to get it all off, as the stickers provided to cover the buttons did not prevent the glue going there and pretty much everywhere else. Also, the fingerprint scanner works but it feels slower now. Fit: 7/10; Ease to install: 5/10; Kit to prevent glue spread: 1/10. To be fair it was 1/5 of the price to the better rated competitor, so for that price it feels about right. Overall it looks ok and if you are not looking for it you probably dont know its there.