The Lamptron SM436 PCI RGB & Fan Controller offers not only a wide functionality, but also a high compatibility. Up to four fans with or without PWM control and RGB products with or without digital RGB LEDs run on it . The separate LCD display can be attached to PCI slots, the numerous information can then be admired through a transparent side panel made of hard or acrylic glass. Control is via an infrared remote control . Features: - Control board for fan and RGB LED lighting - Separate LCD display with temperature, voltage and speed indicators - Four channels for fans with or without PWM with up to 36 watts per channel - Four headers for up to 60 RGB LEDs (12VGRB) - Four headers for up to 60 digitally addressable RGB LEDs (5VDG) - Power supply via 4-pin Molex and SATA - Including an infrared remote control Maximum control of ventilation & lighting The Lamptron SM436 PCI RGB & Fan Controller offers nearly unlimited control over fans and RGB lighting. With up to 36 watts of power per channel, there is almost no limit. The fan controller supports both fans with and without PWM. Power is supplied via a 4-pin Molex connector. In total, up to four fans can be connected to the board of the controller. In addition, both four 4-pin RGB LED fans or strips (12VGRB) and four digitally addressable 3-pin RGB devices can be used(5VDG). The additionally required power supply takes place via a SATA connection. In addition, four temperature sensors are included, which can also be connected to the board. Including LC display and infrared remote control The control of the lighting and the speed of the fan is done via the enclosed infrared remote control . For example, the fans can either be set to quiet mode at 40 percent or maximum mode. Or leave the fan control to the controller. In addition, the lighting modes are set via the remote control.
D**T
Display shows only zeros and remote doesn't work. Fans and RGBs all work, just no control.
I had high hopes for this controller because I've got a complex set up and I haven't been able to find one that works for it. All fans are running and RGB's work, but the display screen does not display any data (yes the data connector is plugged in), and the remote controller doesn't work or just does nothing because the display is messed up.I'm not sure if it's the remote or the display, but I'm leaning towards the display since it's not showing any readings. I'm going to exchange it for a new one and will revise my review if the new one works as advertised.
G**N
works well!
I thoroughly love the way the lcd mounts inside of the case. It allows me to see, at a glance, what is going on with the PC!
Trustpilot
2 weeks ago
3 weeks ago