EKWB EK-Coolstream Classic PE 360

i pre-cleaned and pre-treated this radiator...it didnt need it, i have washed junk out of multiple radiators in the past, this radiator had zero junk inside from the factory. The fins are spaced far apart enough that regular airflow fans are plenty to keep your system cool, i used ll120's from corsair and my 2080 ti and 9900kf stay under 55c under full load.

Multiple fins bent. Took maybe10 flushes (half acid flush then distilled water) to clean to the point where no bits were draining out. Once I got it cleaned up and the fins tediously repositioned it worked fine. It's a radiator, not much to go wrong. As far as performance: it's a low (FPI) density radiator with an extra medium thickness. It performs fine.The draw to this rad is its comfort level. With a low FPI density and 45mm thickness you can use any case fan you like and you'll still get decent cooling. This equates to less money for fans and less noise due to lower fan RPMs. I tested this rad with both EZDIY-FAB airflow fans and Arctic P12 static pressure fans at varying speeds. The difference was a less than 2°C. At near max fan speeds (1500 rpm) the EZDIY-FAB was 52.1°C and the P12 was 50.4°.

I found the order to have been used and purchased new

After Several Rinses and a Rad Clean, Black Specks still remain coming from his radiator, was it used?? It is so bad, will not be using it in my loop.

I received a used radiator, will return it immediately !

Ojoo limpia antes..tiene algo dentro

J'ai fait l'acquisition de ce radiateur en urgence. Travaillant déjà avec cette marque depuis plusieurs années, j'ai été surpris que l'emballage n'était pas sceller donc déjà ouvert. Je me dis reconditionnement mais il manque des vis de fixation. Je veux bien qu'on reconditionne mais allez plus loin dans le reconditionnement ou alors dites le que c'est du reconditionné qu'on ne soit pas surprit alors qu'on paye le prix du neuf. J'ai bien évidemment renvoyé le produit.