Kawasaki Genuine 99999-0627 Complete Cylinder Head Kit #1 For FR FS FX651V-730V

Easy to install and fit perfectly

It fit well and worked well.

I installed this head near the beginning of the mowing season after the original bent a valve. This was a fairly simple job and could have been completed in 3-4 hours if the muffler on my mower would not have been slightly bent making final assembly a challenge. My local shop was going to charge me $8-900 for parts and labor. With this kit and a little time, it made the decision very easy. Adjusting the valves was also quite a tedious process. I plan to pull the valve covers on my machine this fall to inspect components and adjust the valves to check for excessive valve recession. If I find any issues then, I will update this review.It should be noted that there was a fairly large gouge in the aluminum surface of the head (as shown in the attached pictures). I did not consider it be be major as it is not near to the cylinder sealing surface and was close to the outside. I simply used some emery cloth to smooth it back out and used a small amount of high temp silicon to help fill the void. It should also be noted that this was not a packaging flaw. The head arrived in a sealed bag, inside of a bag with all of the other parts that come with the kit in their own appropriate packaging, all inside of a box.

This kit made replacing the left head, which is prone to valve guide failure, a breaze.

Much cheaper than dealer and dealer quality. They wanted more for cylinder head without valves and springs.

Works good. Would be so nice if they include the rods too.

Although it hasn't been all that long since I installed it on the four wheeler it seems to be doing good I moved the battery higher up because on the four-wheeler the battery is mounted real low hopefully that will keep them from getting shorted out when driving through creeks this is the second regulator I have put on it

Install on my 52 in Husqavarna works as should back up and running like new.