for Black iPad 6 2018 6th Generation A1893 A1954 Touch Screen Digitizer Assembly Replacement with Home Button,Camera Bracket,Pre-Installed Adhesive,Tool Repair Kit

Was a little hesitant with the price and reviews, but so far so good. Keep in mind I don't recommend this repair for everyone and I recommend you have a reworks station with a proper heat gun for the adhesive. But if you know what your doing its not bad got it done in total of a hour or so.

This kit is a piece of junk. The home button connector does not fit the original connector slot. The connector that this replacement comes with is to big and does not slide in easy as the original or as easy as my other iPad kit. Ended up shorting out my lcd screen trying to install this kit. Waste of money now I have a broken lcd screen that I have to replace now since this kit shorted mine out. Thanks a lot. Spend the extra money and buy a better kit.

First things first, make sure you have a clean space and some sort of protection for your eyes, it gets messy. Finding the right YouTube video for instructions, the right patience, and the right time, everything works well. I did have issues near the end with the screen but that’s because of something not plugged in right. Everything about this screen is good EXCEPT the adhesion, it’s easy to lift so I might have to find some of my own glue to stick it down, it’s not much of an issue though. Also it’s hard to clean the screens but these are just minor issues. Other than that it’s worth buying if you have patience.

Bought installed 3 days later touch started to freeze and finally stopped working. Tested on separate device same issue while other screen from a different seller on same devices worked fine.This screen was definitely cheaper than the other though but get what you pay for.Tools they provide are useless also. None are for iPad repair just basic cell phone repair tools and not even close for what you need to fix a iPad

First time trying this repair and was very happy with the out come. I did scratch the LCD screen while scraping off the digitizer screen but I could live with it. Wish there were instructions that came with the kit, I had to follow YouTube videos.

A difficult repair but everything worked

Because not enough edhesive to stick on when closing so ipad work for a while then not really good when you press letters or numbers.

I'm a 62 yr old grandma and replaced the broken screen on my granddaughters I pad. This fit perfect. Removing the broken glass and adhesive is the hardest part. I watched YouTube videos and it really helped. This item saved us a lot of money.

The media could not be loaded.  I bought this screen as a “ if it works it works and if it doesn’t oh well” as my daughters iPad screen was pretty smashed upFollowed a YouTube video for replacing (ipad 6th gen)Pulled off a successful replacement. Super straight forward (idoctor on YouTube is great to follow for DIY)Happy with the purchase, everything works as expected. 👍🏽Saves you 200$+ for an instore repair.

The media could not be loaded.

ヒートガン（ドライヤー）使ったら、意外と簡単に交換出来ました。でもなかったら難しいかも

写真の通り、このバキバキのガラスの状態から直すことができました。使った物はこの商品+ドライヤーです。小さいプラスドライバーとかもついてきてましたが、存在を知らず使ってないので使えるかは分かりません。(多分使える)また、これは液晶が死んでない(画面が反応する)人向けの商品です。修理の方法は「インターネットの記事」「動画」を強くおすすめします。このバキバキ具合だったので、入っていた金属のヘラがとっても役に立ちました。ふちに残ったガラス片を取ったり。本当にあってよかった〜。接着力→接着剤が結構残ってて(写真二枚目の通り)も、特に浮いたりとかはなかったです。あったとしても裏にして置いとけば直った気がします。でも一つ、配線がある右下が浮いちゃいました。上手い人ならうまく貼れたのかなーと思いますが、自分は養生テープで一旦押さえつけてます。耐久性→まだわかりませんが、気になる箇所はないです。タッチスクリーン→純正のガラスに比べて全体的にほんの少しだけ白っぽい「なんか白っぽいな」って思うくらい。あまり気にならないです。追記：白っぽいっていうか、「電源ついてるけど画面には何も出てこないときの白み」って感じです。iPadを立ち上げるとき、リンゴマークがでてくるまでの間みたいな白みです。見出しの言葉ですが、商品うんぬんではなく、自分での修理はガラスを剥がす段階でガラスが液晶を傷つけたり、ガラスと液晶の間にゴミが入ったりは絶対にすると思います。自分はどっちもやりました。自分はサブ機として使っているので大変満足ですが、大事にしているメイン機ではやらないほうがいいと思います。メイン機には今すぐ3000円のガラスフィルムを貼って、もしメイン機の画面がバキバキになっちゃった人は修理してサブ機にしましょう。

Gute Qualität, Touchscreen funktioniert, Fingerabdrucksensor nicht mehr, das ist aber Apple geschuldet.Hätte mir noch das Klebeband dabei gewünscht für den Rahmen.